[chirp_users] Programming New BTECH GMRS-50X1

David C. Jenner
Sat May 18 10:23:24 PDT 2019


Interesting.  When I run CHIRP directly on the Mac, the upload time is 
about 4 times faster: 1 min 5 sec.

Must be something going on in CHIRP or Windows 10 or Parallels when I 
run it that way.  I usually do all radio programming in Windows 10, but 
when CHIRP is the only way, maybe directly on the Mac is better?  I 
don't see any slow action for other radio programming, CHIRP or RT 
Systems, when running on Windows 10.

Dave

On 5/17/19 7:56 PM, David C. Jenner via chirp_users wrote:
> I successfully programmed a new BTECH GMRS-50X1 using my older BTECH
> GMRS-V1 as a basis.
> 
> However, it took 4 min and 30 sec to upload to the radio.  The first
> thing I did was read out the 50X1 and write back to it.  That upload and
> all since, with new entries, have taken about the same time, which seems
> excessively long?  I don't see this with other radios.
> 
> Latest version of CHIRP on Windows 10 running on Parallels on a MacBook
> Pro using both BTECH and RT Systems cables.  Comm port says it's 9600 baud.
> 
> Dave
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to David Jenner at djenner8 at mac.com
> To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
> 




More information about the chirp_users mailing list