[chirp_users] UV-82HP display question

Tom Balaban
Fri May 17 12:33:58 PDT 2019


Hi Dan,

See if this helps.

Press the Menu button then press the down arrow or the up arrow until 
you get the item 21 - MDF-A Channel Display, Hit menu again the the up 
or down arrow until you see Channel Name then press Menu again then 
Exit.

Do the same thing for item 22 - MDF-B Channel Display only this time 
select Frequency.

Now if you have both A & B set to the same channel the A display will 
show the name and the B display the frequency.

Good luck,
Tom

------ Original Message ------
From: "Dan Jolley" <danjolley at hotmail.com>
To: "Discussion of CHIRP" <chirp_users at intrepid.danplanet.com>
Sent: 5/17/2019 3:24:20 PM
Subject: Re: [chirp_users] UV-82HP display question

>No problem Tom. I watched a guy do something like that on the keypad on 
>a YouTube video, but it wasn't the display I had in mind. Plus he 
>didn't explain a lot, especially which keys he pressed on the keyboard.
>
>Dan
>
>This Hotmail is a pain!!!! It's nothing like Yahoo!
>--------------------------------------------------------------------------------
>From:chirp_users-bounces at intrepid.danplanet.com 
><chirp_users-bounces at intrepid.danplanet.com> on behalf of Tom Balaban 
><mototom800 at gmail.com>
>Sent: Friday, May 17, 2019 2:13 PM
>To: Discussion of CHIRP
>Subject: Re: [chirp_users] UV-82HP display question
>
>Hi Dan,
>
>I may have mildly misspoke. I know it can be done manually but I think 
>it would be very difficult, if not impossible to get CHIRP to do it. 
>Sorry for any confusion.
>
>Tom
>
>------ Original Message ------
>From: "Dan Jolley" <danjolley at hotmail.com>
>To: "chirp_users at intrepid.danplanet.com" 
><chirp_users at intrepid.danplanet.com>
>Sent: 5/17/2019 3:01:42 PM
>Subject: Re: [chirp_users] UV-82HP display question
>
>>Thanks Charles & Tom, I have tried so many combinations in Chirp and 
>>I've also watched some YouTube videos, none of them have shown that 
>>capability. I couldn't get it to do it in Chirp either.
>>
>>It sure would be nice to have that feature! Anyway, if I knew someone 
>>that knew how to do that it would be ya'll!
>>
>>Thanks again,
>>Dan Jolley
>>--------------------------------------------------------------------------------
>>From: Dan Jolley
>>Sent: Friday, May 17, 2019 1:13 PM
>>To:chirp_users at intrepid.danplanet.com
>>Subject: UV-82HP display question
>>
>>I have a UV-82HP, and I would like the top line to say the channel 
>>name, and on the bottom line I would like it to show the correct 
>>frequency of the channel I am on. Example: If I am on NOAA on the top 
>>line I would like it to show 162.525 on the bottom line. Which is the 
>>NOAA frequency in our area.
>>
>>I also have a UV-82C, UV-5R and a UV-5RTP I would like to do the same 
>>thing to (if possible).
>>
>>Is this possible? I have done so many google searches and read a bunch 
>>of articles. One man said he had his radio this way, but did not say 
>>how he did it.
>>
>>I have been playing around with the Settings in Chirp and I have the 
>>Name on the top line, but can't get the correct frequency on the 
>>bottom line.
>>
>>Thank you in advance,
>>Dan Jolley
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20190517/62377c9f/attachment.html 


More information about the chirp_users mailing list