[chirp_users] Baofeng-uv82

Wed May 15 01:39:56 PDT 2019

Billy,

Tell us these things.

What Operating System and Version are you using?
Example Windows Vista, or Arch Linux, etc.

Go to Device Manager if you're using Windows and see if there are any
Warnings especially under connections and com ports. If so, what are the
warnings?

Unplug your cable into the computer from your radio. One of the com ports
will go away in Device Manager. Now plug it in, you should get a
notification, what com port does it say? Do you get a notification?

Make sure the com port that you cable is using is the same one selected in
CHIRP.

Regards,

David
N1EA

On Tue, May 14, 2019, 20:56 Billy Shirer <bshirer80 at gmail.com> wrote:

> I only have 3 Comm Ports
>
> On Tue, May 14, 2019, 8:46 PM Dan Jolley via chirp_users <
> chirp_users at intrepid.danplanet.com wrote:
>
>> Billy, sometimes Windows changes them back from 3.2.0.0. Check your COM
>> PORT and make sure it is on COM5.
>>
>> On Tuesday, May 14, 2019, 7:39:19 PM CDT, Billy Shirer <
>> bshirer80 at gmail.com> wrote:
>>
>>
>> Okay,  I will try that.
>> Thanks
>>
>> On Tue, May 14, 2019, 7:44 PM Jardy via chirp_users <
>> chirp_users at intrepid.danplanet.com wrote:
>>
>> Those cables can still be used if you roll the drivers back. Usually hits
>> Prolific cables, use driver 3.2.0.0. No problems.
>>
>> Jardy Dawson WA7JRD
>> Message sent through sub space hailing frequencies using the Universal
>> Translator.
>>
>>
>> On May 14, 2019, at 14:58, Steve Thomas <stevet at alertcpr.com> wrote:
>>
>> Is it a new cable?  There are a lot of cables out there that have bad
>> chips that used to work but don't work with newer versions of the Windows
>> 10 driver.  And since Windows 10 automatically updates the drivers, some
>> cables that used to work quit along the way.
>> On 5/14/2019 4:17 PM, Billy Shirer wrote:
>>
>> Yes, and again nothing happened
>>
>> On Tue, May 14, 2019, 5:12 PM Glenn At Home <GlennErvin at cableone.net
>> wrote:
>>
>> Did you try to download from your radio first?
>>
>> ----- Original Message -----
>> *From:* Billy Shirer <bshirer80 at gmail.com>
>> *To:* Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
>> *Sent:* Tuesday, May 14, 2019 4:03 PM
>> *Subject:* Re: [chirp_users] Baofeng-uv82
>>
>> I windows 10
>>
>> I downloaded the Chirp Software and I connected my cable to my laptop and
>> opened the download and proceeded to program my radio and the a window
>> opened and said......No file found
>>
>> On Tue, May 14, 2019, 4:41 PM Glenn At Home <GlennErvin at cableone.net
>> wrote:
>>
>> What is your OS?
>> What have you tried so far?
>>
>> ----- Original Message -----
>> *From:* Billy Shirer <bshirer80 at gmail.com>
>> *To:* chirp_users at intrepid.danplanet.com
>> *Sent:* Tuesday, May 14, 2019 3:22 PM
>> *Subject:* [chirp_users] Baofeng-uv82
>>
>> I downloaded Chirp for my baofeng-uv82 and I can't get it Programmed
>>
>> ------------------------------
>> _______________________________________________
>> chirp_users mailing list
>> chirp_users at intrepid.danplanet.com
>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>> This message was sent to Glenn at glennervin at cableone.net
>> To unsubscribe, send an email to
>> chirp_users-unsubscribe at intrepid.danplanet.com
>> _______________________________________________
>> chirp_users mailing list
>> chirp_users at intrepid.danplanet.com
>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>> This message was sent to Billy Shirer at bshirer80 at gmail.com
>> To unsubscribe, send an email to
>> chirp_users-unsubscribe at intrepid.danplanet.com
>>
>> ------------------------------
>> _______________________________________________
>> chirp_users mailing list
>> chirp_users at intrepid.danplanet.com
>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>> This message was sent to Glenn at glennervin at cableone.net
>> To unsubscribe, send an email to
>> chirp_users-unsubscribe at intrepid.danplanet.com
>> _______________________________________________
>> chirp_users mailing list
>> chirp_users at intrepid.danplanet.com
>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>> This message was sent to Billy Shirer at bshirer80 at gmail.com
>> To unsubscribe, send an email to
>> chirp_users-unsubscribe at intrepid.danplanet.com
>>
>>
>> _______________________________________________
>> chirp_users mailing listchirp_users at intrepid.danplanet.comhttp://intrepid.danplanet.com/mailman/listinfo/chirp_users
>> This message was sent to Steve Thomas at stevet at alertcpr.com
>> To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
>>
>> --
>> Steve Thomas, EMT-P
>> Executive Director
>> AlertCPR Emergency Training & Supply
>> Office 866-569-7139   Cell 214-912-7690Stevet at alertcpr.com
>>
>> _______________________________________________
>> chirp_users mailing list
>> chirp_users at intrepid.danplanet.com
>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>> This message was sent to Jardy at jardy72 at yahoo.com
>> To unsubscribe, send an email to
>> chirp_users-unsubscribe at intrepid.danplanet.com
>>
>> _______________________________________________
>> chirp_users mailing list
>> chirp_users at intrepid.danplanet.com
>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>> This message was sent to Billy Shirer at bshirer80 at gmail.com
>> To unsubscribe, send an email to
>> chirp_users-unsubscribe at intrepid.danplanet.com
>>
>> _______________________________________________
>> chirp_users mailing list
>> chirp_users at intrepid.danplanet.com
>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>> This message was sent to Dan Jolley at oldhippie1955 at yahoo.com
>> To unsubscribe, send an email to
>> chirp_users-unsubscribe at intrepid.danplanet.com
>> _______________________________________________
>> chirp_users mailing list
>> chirp_users at intrepid.danplanet.com
>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>> This message was sent to Billy Shirer at bshirer80 at gmail.com
>> To unsubscribe, send an email to
>> chirp_users-unsubscribe at intrepid.danplanet.com
>
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to D.J.J. Ring, Jr. at n1ea at arrl.net
> To unsubscribe, send an email to
> chirp_users-unsubscribe at intrepid.danplanet.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20190515/11580df8/attachment.html 