[chirp_users] Baofeng-uv82

Glenn At Home
Tue May 14 18:10:58 PDT 2019


I usually select the USB option, which is at the bottom of the list.
Glenn
----- Original Message ----- 
From: Billy Shirer 
To: Dan Jolley ; Discussion of CHIRP 
Cc: Jardy 
Sent: Tuesday, May 14, 2019 7:54 PM
Subject: Re: [chirp_users] Baofeng-uv82


I only have 3 Comm Ports


On Tue, May 14, 2019, 8:46 PM Dan Jolley via chirp_users <chirp_users at intrepid.danplanet.com wrote:

  Billy, sometimes Windows changes them back from 3.2.0.0. Check your COM PORT and make sure it is on COM5.



  On Tuesday, May 14, 2019, 7:39:19 PM CDT, Billy Shirer <bshirer80 at gmail.com> wrote: 




  Okay,  I will try that.
  Thanks 


  On Tue, May 14, 2019, 7:44 PM Jardy via chirp_users <chirp_users at intrepid.danplanet.com wrote:

    Those cables can still be used if you roll the drivers back. Usually hits Prolific cables, use driver 3.2.0.0. No problems. 


    Jardy Dawson WA7JRD
    Message sent through sub space hailing frequencies using the Universal Translator. 



    On May 14, 2019, at 14:58, Steve Thomas <stevet at alertcpr.com> wrote:


      Is it a new cable?  There are a lot of cables out there that have bad chips that used to work but don't work with newer versions of the Windows 10 driver.  And since Windows 10 automatically updates the drivers, some cables that used to work quit along the way.


      On 5/14/2019 4:17 PM, Billy Shirer wrote:

        Yes, and again nothing happened 


        On Tue, May 14, 2019, 5:12 PM Glenn At Home <GlennErvin at cableone.net wrote:

          Did you try to download from your radio first?

          ----- Original Message ----- 
          From: Billy Shirer 
          To: Discussion of CHIRP 
          Sent: Tuesday, May 14, 2019 4:03 PM
          Subject: Re: [chirp_users] Baofeng-uv82


          I windows 10 


          I downloaded the Chirp Software and I connected my cable to my laptop and opened the download and proceeded to program my radio and the a window opened and said......No file found 


          On Tue, May 14, 2019, 4:41 PM Glenn At Home <GlennErvin at cableone.net wrote:

            What is your OS?
            What have you tried so far?

            ----- Original Message ----- 
            From: Billy Shirer 
            To: chirp_users at intrepid.danplanet.com 
            Sent: Tuesday, May 14, 2019 3:22 PM
            Subject: [chirp_users] Baofeng-uv82


            I downloaded Chirp for my baofeng-uv82 and I can't get it Programmed 


--------------------------------------------------------------------
            _______________________________________________
            chirp_users mailing list
            chirp_users at intrepid.danplanet.com
            http://intrepid.danplanet.com/mailman/listinfo/chirp_users
            This message was sent to Glenn at glennervin at cableone.net
            To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com 
            _______________________________________________
            chirp_users mailing list
            chirp_users at intrepid.danplanet.com
            http://intrepid.danplanet.com/mailman/listinfo/chirp_users
            This message was sent to Billy Shirer at bshirer80 at gmail.com
            To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com


----------------------------------------------------------------------
          _______________________________________________
          chirp_users mailing list
          chirp_users at intrepid.danplanet.com
          http://intrepid.danplanet.com/mailman/listinfo/chirp_users
          This message was sent to Glenn at glennervin at cableone.net
          To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
          _______________________________________________
          chirp_users mailing list
          chirp_users at intrepid.danplanet.com
          http://intrepid.danplanet.com/mailman/listinfo/chirp_users
          This message was sent to Billy Shirer at bshirer80 at gmail.com
          To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com

         
_______________________________________________
chirp_users mailing list
chirp_users at intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to Steve Thomas at stevet at alertcpr.com
To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com-- 
Steve Thomas, EMT-P
Executive Director
AlertCPR Emergency Training & Supply
Office 866-569-7139   Cell 214-912-7690
Stevet at alertcpr.com_______________________________________________
      chirp_users mailing list
      chirp_users at intrepid.danplanet.com
      http://intrepid.danplanet.com/mailman/listinfo/chirp_users
      This message was sent to Jardy at jardy72 at yahoo.com
      To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
    _______________________________________________
    chirp_users mailing list
    chirp_users at intrepid.danplanet.com
    http://intrepid.danplanet.com/mailman/listinfo/chirp_users
    This message was sent to Billy Shirer at bshirer80 at gmail.com
    To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
  _______________________________________________
  chirp_users mailing list
  chirp_users at intrepid.danplanet.com
  http://intrepid.danplanet.com/mailman/listinfo/chirp_users
  This message was sent to Dan Jolley at oldhippie1955 at yahoo.com
  To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
  _______________________________________________
  chirp_users mailing list
  chirp_users at intrepid.danplanet.com
  http://intrepid.danplanet.com/mailman/listinfo/chirp_users
  This message was sent to Billy Shirer at bshirer80 at gmail.com
  To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com


--------------------------------------------------------------------------------


_______________________________________________
chirp_users mailing list
chirp_users at intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to Glenn at glennervin at cableone.net
To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20190514/fcee2cd9/attachment.html 


More information about the chirp_users mailing list