[chirp_users] Baofeng-uv82

Billy Shirer
Tue May 14 17:54:50 PDT 2019


I only have 3 Comm Ports

On Tue, May 14, 2019, 8:46 PM Dan Jolley via chirp_users <
chirp_users at intrepid.danplanet.com wrote:

> Billy, sometimes Windows changes them back from 3.2.0.0. Check your COM
> PORT and make sure it is on COM5.
>
> On Tuesday, May 14, 2019, 7:39:19 PM CDT, Billy Shirer <
> bshirer80 at gmail.com> wrote:
>
>
> Okay,  I will try that.
> Thanks
>
> On Tue, May 14, 2019, 7:44 PM Jardy via chirp_users <
> chirp_users at intrepid.danplanet.com wrote:
>
> Those cables can still be used if you roll the drivers back. Usually hits
> Prolific cables, use driver 3.2.0.0. No problems.
>
> Jardy Dawson WA7JRD
> Message sent through sub space hailing frequencies using the Universal
> Translator.
>
>
> On May 14, 2019, at 14:58, Steve Thomas <stevet at alertcpr.com> wrote:
>
> Is it a new cable?  There are a lot of cables out there that have bad
> chips that used to work but don't work with newer versions of the Windows
> 10 driver.  And since Windows 10 automatically updates the drivers, some
> cables that used to work quit along the way.
> On 5/14/2019 4:17 PM, Billy Shirer wrote:
>
> Yes, and again nothing happened
>
> On Tue, May 14, 2019, 5:12 PM Glenn At Home <GlennErvin at cableone.net
> wrote:
>
> Did you try to download from your radio first?
>
> ----- Original Message -----
> *From:* Billy Shirer <bshirer80 at gmail.com>
> *To:* Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
> *Sent:* Tuesday, May 14, 2019 4:03 PM
> *Subject:* Re: [chirp_users] Baofeng-uv82
>
> I windows 10
>
> I downloaded the Chirp Software and I connected my cable to my laptop and
> opened the download and proceeded to program my radio and the a window
> opened and said......No file found
>
> On Tue, May 14, 2019, 4:41 PM Glenn At Home <GlennErvin at cableone.net
> wrote:
>
> What is your OS?
> What have you tried so far?
>
> ----- Original Message -----
> *From:* Billy Shirer <bshirer80 at gmail.com>
> *To:* chirp_users at intrepid.danplanet.com
> *Sent:* Tuesday, May 14, 2019 3:22 PM
> *Subject:* [chirp_users] Baofeng-uv82
>
> I downloaded Chirp for my baofeng-uv82 and I can't get it Programmed
>
> ------------------------------
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to Glenn at glennervin at cableone.net
> To unsubscribe, send an email to
> chirp_users-unsubscribe at intrepid.danplanet.com
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to Billy Shirer at bshirer80 at gmail.com
> To unsubscribe, send an email to
> chirp_users-unsubscribe at intrepid.danplanet.com
>
> ------------------------------
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to Glenn at glennervin at cableone.net
> To unsubscribe, send an email to
> chirp_users-unsubscribe at intrepid.danplanet.com
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to Billy Shirer at bshirer80 at gmail.com
> To unsubscribe, send an email to
> chirp_users-unsubscribe at intrepid.danplanet.com
>
>
> _______________________________________________
> chirp_users mailing listchirp_users at intrepid.danplanet.comhttp://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to Steve Thomas at stevet at alertcpr.com
> To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
>
> --
> Steve Thomas, EMT-P
> Executive Director
> AlertCPR Emergency Training & Supply
> Office 866-569-7139   Cell 214-912-7690Stevet at alertcpr.com
>
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to Jardy at jardy72 at yahoo.com
> To unsubscribe, send an email to
> chirp_users-unsubscribe at intrepid.danplanet.com
>
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to Billy Shirer at bshirer80 at gmail.com
> To unsubscribe, send an email to
> chirp_users-unsubscribe at intrepid.danplanet.com
>
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to Dan Jolley at oldhippie1955 at yahoo.com
> To unsubscribe, send an email to
> chirp_users-unsubscribe at intrepid.danplanet.com
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to Billy Shirer at bshirer80 at gmail.com
> To unsubscribe, send an email to
> chirp_users-unsubscribe at intrepid.danplanet.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20190514/122124ba/attachment.html 


More information about the chirp_users mailing list