[chirp_users] UV-5R question

[Nigel A. Gunn G8IFF/W8IFF]

If the radio doesn't have simplex/duplex settings then perhaps you set independent Rx and Tx frequencies.

 

> On 21 January 2019 at 14:25 "Keith .Yordy" <keith.yordy at gmail.com> wrote:
> 
>      I have used Chirp to setup several UV-5R units and it works fantastic! However, I was trying to setup a UV-5R with the keypad. I see in Chirp there is a setting for Duplex, but this doesn't appear to show up anywhere in the UV-5R. I have compared 462.600 simplex and 462.600 duplex and see no differences in the keypad menu system. if I was to setup a duplex channel manually, I am assuming I would have to set the offsets, etc., even though they show no differences on the UV-5R. Is there another trick I am missing?
> 
>     KY 
>     _______________________________________________
>     chirp_users mailing list
>     chirp_users at intrepid.danplanet.com
>     http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>     This message was sent to Nigel Gunn, W8IFF at nigel at ngunn.net
>     To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
> 


Nigel A. Gunn, 1865 El Camino Drive, Xenia, OH 45385-1115, USA. tel +1 937 825 5032
Amateur Radio G8IFF W8IFF and GMRS WRBV701, e-mail nigel at ngunn.net www http://www.ngunn.net
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20190121/4c588abd/attachment.html