[chirp_users] Yaesu FT-60 will not upload

[Jardy]

Correction: kc8unj.com

Jardy Dawson WA7JRD
Message sent through sub space hailing frequencies using the Universal Translator. 


> On Feb 13, 2019, at 19:19, Jardy via chirp_users <chirp_users at intrepid.danplanet.com> wrote:
> 
> Try using FT-60 Commander software (free), found at www.kc8ung.com. Use the alternate write method. Also check your cable on Device Manager and see if it shows to be Prolific. If it is, try rolling the driver to 3.2.0.0. Check www.miklor.com for more info. Push the cable in firmly, too. 
> 
> Jardy Dawson WA7JRD
> Message sent through sub space hailing frequencies using the Universal Translator. 
> 
> 
>> On Feb 13, 2019, at 16:34, Bert Garcia <bertgarcia73 at gmail.com> wrote:
>> 
>> I can download from my FT-60 into Chirp, but it will not upload to the radio.  Error says communications failure.  My FT-60 is in the ---RX--- mode.  Any suggestions?
>> Bert
>> _______________________________________________
>> chirp_users mailing list
>> chirp_users at intrepid.danplanet.com
>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>> This message was sent to Jardy at jardy72 at yahoo.com
>> To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to Jardy at jardy72 at yahoo.com
> To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20190213/b75667f6/attachment.html