[chirp_users] "RF power set" in Yaesu FT-857

[Neil B]

Incorrect, it’s a yaesu, not a baofeng clone.

From: chirp_users-bounces at intrepid.danplanet.com <chirp_users-bounces at intrepid.danplanet.com> On Behalf Of Nigel A. Gunn G8IFF/W8IFF
Sent: 20 August 2019 01:20
To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>; Ernesto Xload <xload.es at gmail.com>
Subject: Re: [chirp_users] "RF power set" in Yaesu FT-857


No. It corresponds to your radios low/med/high setting usually.
On 19 August 2019 at 18:00 Ernesto Xload <xload.es at gmail.com<mailto:xload.es at gmail.com>> wrote:
I'm programming a Yaesu FT-857 and I have a doubt: does the "RF power set" value correspond to the output power in watts?

Best regards
73
_______________________________________________
chirp_users mailing list
chirp_users at intrepid.danplanet.com<mailto:chirp_users at intrepid.danplanet.com>
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to Nigel Gunn, W8IFF at nigel at ngunn.net<mailto:nigel at ngunn.net>
To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com<mailto:chirp_users-unsubscribe at intrepid.danplanet.com>



Nigel A. Gunn, 1865 El Camino Drive, Xenia, OH 45385-1115, USA. tel +1 937 825 5032
Amateur Radio G8IFF W8IFF and GMRS WRBV701, e-mail nigel at ngunn.net<mailto:nigel at ngunn.net> www http://www.ngunn.net
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20190820/58fa0a07/attachment.html