[chirp_users] "RF power set" in Yaesu FT-857

[Nigel A. Gunn G8IFF/W8IFF]

No. It corresponds to your radios low/med/high setting usually.

> On 19 August 2019 at 18:00 Ernesto Xload <xload.es at gmail.com> wrote:
> 
>     I'm programming a Yaesu FT-857 and I have a doubt: does the "RF power set" value correspond to the output power in watts?
> 
>     Best regards
>     73
>     _______________________________________________
>     chirp_users mailing list
>     chirp_users at intrepid.danplanet.com
>     http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>     This message was sent to Nigel Gunn, W8IFF at nigel at ngunn.net
>     To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
> 


Nigel A. Gunn, 1865 El Camino Drive, Xenia, OH 45385-1115, USA. tel +1 937 825 5032
Amateur Radio G8IFF W8IFF and GMRS WRBV701, e-mail nigel at ngunn.net www http://www.ngunn.net
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20190819/c9c33a01/attachment.html