[chirp_users] cloning cable wiring diagram

[Rassie Smit]

Thanx for the post Peter
I myself was searching for a diagram!!Now i found my fault in my cable!!
Cheers

Sent from Yahoo Mail on Android 
 
  On Sat, 15 Sep 2018 at 22:20, Peter<ptlambert at sbcglobal.net> wrote:     
I recently ordered this TENQ "cloning" cable from Amazon:
 
https://www.amazon.com/gp/product/B00MK02BX2
 
This cable has Kenwood style connectors (3.5mm TRS & 2.5mm TRS) on each end, for radio-to-radio configuration copy between Baofeng, Wouxun, and "any two-pin style radio with a Kenwood Baofeng plug".
 
I wanted to verify the pinout before adding it to my radio bag.   So I spent several hours scouring the Internet for a wiring diagram for such a cable, but with no success.  Even simple pinout descriptions were somewhat vague ("back-to-back", etc.).  So I ultimately buzzed out the cable with a DVM, tabulated the results, and mocked up a JPEG diagram based on an image that originally came from Miklor.com.  See attached for the finished product.  The diagram shows that the cable basically has Data Tx from one end connected to Data Rx on the other and vice-versa, with Data Ground connected between both ends.
 
 
I wanted to submit this to John for possible inclusion on his site, but I don't see any contact form there.  I do know that he posts to this list so here I am...  John, if you are interested, feel free to re-post wherever you'd like, maybe here?
 
http://www.miklor.com/COM/UV_Technical.php
 
Cheers!
 
 (Peter)
 
P.S. I do understand that this list is for CHIRP issues, hence any cable discussion would normally be limited to "programming" cables, e.g. Kenwood to USB with a suitable integrated controller chip.  However, I am thinking that this info might be useful to some folks here regardless.
 
 _______________________________________________
chirp_users mailing list
chirp_users at intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to Rassie Smit at e_j_smit at yahoo.com
To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20180918/c1f183f1/attachment.html 
-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: Untitled
Url: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20180918/c1f183f1/attachment.pl