[chirp_users] Using Chirp to set up FT-60 for satellite comm

[Not D'Arcy Cain]

Hi Tip,

Page 28 of the FT-60 manual covers the topic of manually programming "Odd
Splits". The receive and transmit frequencies can be set independently,
including different bands (I just tried it!).

I have used chirp to program my ft-60 but not this specific crossband
VHF/UHF configuration. But I do not see any reason not to try it.

Here is an article about this:
http://www.gatorradio.org/FT60R_Satellite.html

Chris KC9AD

-----Original Message-----
From: chirp_users-bounces at intrepid.danplanet.com
<chirp_users-bounces at intrepid.danplanet.com> On Behalf Of T.E. Klamberg
Klamberg via chirp_users
Sent: Monday, May 07, 2018 3:23 PM
To: chirp_users <chirp_users at intrepid.danplanet.com>
Subject: [chirp_users] Using Chirp to set up FT-60 for satellite comm

Hi all,

I know that satellite communications works best with two radios operating
duplex, but I also learned that sat comm can be accomplished using a Yaesu
FT-60.
Is there a way that Chirp can be used to set up the VHF uplink and UHF
downlink? Or can anyone guide me in the right direction for tutorial or
instruction?
Thanks!

Tip
N9MVX
_______________________________________________
chirp_users mailing list
chirp_users at intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to Chris KC9AD at nbv87 at hotmail.com To unsubscribe,
send an email to chirp_users-unsubscribe at intrepid.danplanet.com