[chirp_users] Programming TYT TH 9000

[Allen Stines]

Actually using a FTDI cable. I do have one with profilic chip, but no luck
with it.

Allen Stines
Assistant Chief BPVFD
Deacon at Walnut Freewill
828-712-6554

On Mon, Mar 19, 2018, 19:44 Jim Unroe <rock.unroe at gmail.com> wrote:

> On Mon, Mar 19, 2018 at 7:22 PM, Allen Stines <duckettham at gmail.com>
> wrote:
> > Here is the debug log.
> >
>
> Thanks. I don't see a response. I would look for a problem with the
> programming cable.
>
> Looks like you are running windows. If device manager shows that the
> programming cable was manufactured with a Prolific type USB-to-TTL
> chip, you may have to download, install and select an older Prolific
> v3.2.0.0 device driver. Most Prolific chips (nearly 100%) in
> programming cables are unauthorized copies and the device driver
> supplied by the Prolific company to Microsoft and auto installed by
> Windows is designed to not work with counterfeit chips.
>
> http://www.miklor.com/COM/UV_Drivers.php
>
> I keep several Prolific device driver version installed for testing
> for genuine Prolific chips (they are very rare). The v3.2.0.0 is the
> one I use on a daily basis because it works with both genuine and
> counterfeit chips.
>
> Jim KC9HI
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to duckettham at gmail.com at duckettham at gmail.com
> To unsubscribe, send an email to
> chirp_users-unsubscribe at intrepid.danplanet.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20180320/84f949ba/attachment.html