[chirp_users] TONFA UV-985 (BFB229) Settings issue

Jim Unroe
Fri Jun 1 13:42:21 PDT 2018


zmey,

On Fri, Jun 1, 2018 at 1:05 PM, zmey zlobnov via chirp_users
<chirp_users at intrepid.danplanet.com> wrote:
> I have an issue with my Tonfa UV-985.
> When the reading data from radio is complete, the Settings tab is empty and
> I can change memories only.
> Model: TONFA UV-985 (Baofeng UV-5R firmware?)
> Firmware version: BFB229
> see this: https://e.mail.ru/compose?To=chirp_users@intrepid.danplanet.com

There is a setting that is out of range. Looking at the debug.log file
should shed some light on which setting it is.

One quick fix might be to RESET the radio (download from the radio and
save your current channels and settings first). After the RESET,
download from the radio and see if the Settings tab is now longer
empty. If that took care of the problem, then load the file you saved
earlier into a second tab so you can copy-and-paste the memories over
to the "good" tab.

If the RESET doesn't clear up the issue, you can email you CHIRP Radio
Images (*.img) file to me and I can take a look at it (and possibly
fix the invalid value).

Jim KC9HI



More information about the chirp_users mailing list