[chirp_users] ft897
bsantucci at aol.com
Sun Jul 22 20:14:36 PDT 2018
I am having an issue w chirp uploading profile, reads fine, I make changes, add 1 freq, upload to radio and it goes halfway radio restarts, chirp still shows progress bar radio keeps old power on message wont change it. any thoughts?
-----Original Message-----
From: Larry Howell <larry.howell.47 at gmail.com>
To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
Sent: Sun, Jul 22, 2018 11:04 pm
Subject: Re: [chirp_users] ft897
When and why Microsoft chooses to do things is a great mystery. If Device Manager shows your cable to be a Prolific cable, try rolling your driver back to 3.2.0.0. Info found at www.miklor.com.
Larry AC8YE
On Sun, Jul 22, 2018 at 10:22 PM, randy true <w4rttrandy at outlook.com> wrote:
The OS is Win 7 with updates enabled, but I have been using Chirp for over a year with no hassles. What should the correct driver be?
Randy W4RTT
From: chirp_users-bounces at intrepid.danplanet.com <chirp_users-bounces at intrepid.danplanet.com> on behalf of Larry Howell <larry.howell.47 at gmail.com>
Sent: Sunday, July 22, 2018 7:01 PM
To: Discussion of CHIRP
Subject: Re: [chirp_users] ft897
Hi Randy,
You didn't say which OS your computer runs, so I''l assume it's Windows. If you have it set to install updates automatically, or the OS is Windows 10, then Microsoft has probably replaced the driver with a different one that doesn't like the cable. This typically occurs with cables that use the Prolific USB-serial chips. Many cheap cable use clone chips that newer drivers detect and will ignore because they aren't Prolific chips.
Larry AC8YE
On Sun, Jul 22, 2018 at 6:27 PM, randy true <w4rttrandy at outlook.com> wrote:
Chirp has suddenly stopped communicating with my 897.
I have checked all com port settings in the program/computer/and radio All are OK.
The 897 will still work with other programs on the same com port.
Rebooted, no jot.
Should I try and reset the radio?
Randy W4RTT
_______________________________________________
chirp_users mailing list
chirp_users at intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to larry.howell.47 at gmail.com at larry.howell.47 at gmail.com
To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
_______________________________________________
chirp_users mailing list
chirp_users at intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to larry.howell.47 at gmail.com at larry.howell.47 at gmail.com
To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
_______________________________________________
chirp_users mailing list
chirp_users at intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to Bryan Santucci at bsantucci at aol.com
To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20180722/87e81f2c/attachment.html
More information about the chirp_users
mailing list