[chirp_users] Having Trouble with Chirp and Windows 8

[Jardy]

If Device Manager shows your cable to be a Prolific cable, try rolling your driver back to 3.2.0.0. Info found at www.miklor.com. 

Jardy Dawson WA7JRD
Message sent through sub space hailing frequencies using the Universal Translator. 


> On Jul 20, 2018, at 22:05, Robert Smits <bob at rsmits.ca> wrote:
> 
> I’ve been having trouble getting Chirp to work with my Baofeng GT3 and a Windows 8 machine. Chirp just cannot read the usb port and the radio. I have tried a different cable (that ironically worked under Win 7) and this cable worked with a different radio (same model) and Win 10. The software I have installed is chirp-daily-20180707-installer.exe. When the cable is plugged in I can see the description in device manager.
>  
> Some suggestions about where to go from here would be appreciated.
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to Jardy at jardy72 at yahoo.com
> To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20180720/bdb9dece/attachment.html