[chirp_users] Baofeng UV 82X

[Dave]

I used factory software to configure as a 2/220 radio it was showing 
2/440. I can not save the programing in the factory software or upload 
the file from the radio it uploads a little and then gives a connection 
error. Factory will download to radio but once I close the program I get 
to start over again. Chirp will let me upload the file but, errors out 
the 220 repeaters but not the 220 simplex frequencies. If I edit and 
reenter the repeaters I can download the file to the radio and it works 
but I just opened the saved file on my computer and it has error'd out 
the repeaters again. Also as I enter frequencies in the radio, 2 meters 
shows an offset of .600 but by the time I add the offset that has 
changed to 0.00 same on 220 the offset changes to 0.0 even though I have 
entered a + or - offset. At least the radio is programmed so, thanks for 
the help.

Dave

N7AM


On 1/17/2018 1:00 PM, chirp_users-request at intrepid.danplanet.com wrote:
> Send chirp_users mailing list submissions to
> 	chirp_users at intrepid.danplanet.com
>
> To subscribe or unsubscribe via the World Wide Web, visit
> 	http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> or, via email, send a message with subject or body 'help' to
> 	chirp_users-request at intrepid.danplanet.com
>
> This is because your radio is telling CHIRP is it a VHF/UHF model. It
> was probably configured incorrectly from the factory. I've see it
> before.
>
> You can likely "fix" it using the factory software. Email a freshly
> downloaded CHIRP Radio Images (*.img) file to me and I can help you
> with it.
>
> Jim KC9HI
>
>
>