[chirp_users] Reply to MMcabe

[Mike]

Thanks. I will give it a try 

I spent hours manually programming it

> On Jan 15, 2018, at 4:57 PM, Peter Ryan via chirp_users <chirp_users at intrepid.danplanet.com> wrote:
> 
> @mmcabe: I am new also. I ran into the same type problems you are, using a Valley Enterprises cable, a Yaesu FT-60, and a Macbook. I solved it by reloading all 3 software apps again...Chirp, Python and PL2303...those being the software apps needed for my Macbook. Fearing a repeat need for this requirement, I have left my computer running since the software re-installs. But give this approach a try. It did work for me. And make SURE you execute the correct steps in the exact CORRECT ORDER vis-a-vis the computer/radio or you will get the same "errors" displayed that are bothering you now.. Good luck.
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to mike at mmccabe1 at telus.net
> To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20180115/092f7277/attachment.html