[chirp_users] UV-50x2 / CHIRP Questions

[Jim Unroe]

On Thu, Jan 11, 2018 at 6:07 PM, David Mosley via chirp_users
<chirp_users at intrepid.danplanet.com> wrote:
> Hello All,
>
> I have a new B-TECH UV-50x2 and I am using CHIRP to program it.
> I would like to have the display set up as:
>
> A: Name (2m band)
> B: Frequency (for A)
> C: Name (70cm band)
> D: Frequency (for B)
>
> Is it possible for A to scan 2m only and C to scan 70cm only, or, A&B to
> scan together and C&D to scan together? If so, what settings to I change in
> CHIRP to accomplish this?
>
> Thanks so much for your help.
> 73's
> David Mosley, LP
> Of all the roads you take in life,
> make sure some are DIRT!!!!
>
> Don't retreat, RELOAD!!!!
>
> KG5FAC

You can certainly set the A and C display lines to show names and the
B and D display lines to show frequencies. You can also set it up so
the A/B and C/D display lines stay automatically synced to the same
channels. But you cannot separate 2m and 70cm frequencies. There is
only 1 bank of 200 channels and each display line has equal access to
them all.

Jim KC9HI