[chirp_users] Baofeng UV-5RTP BTECH UV-5X3 - both +- in display for offset

[Jim Unroe]

Rich,

> In my testing, I discovered a neat feature:
> In the 5X3, when using SYNC, and with the NAME in band A and freq in Band B,
> I normally scroll using Band A.
> If I swap to Band B, with freq displayed, and hit *, the display toggles twixt
> the RX and TX freqs, leaving the NAME displayed.

That would be expected. Tapping the [*] key to enable "reverse mode"
swaps the TX and RX frequency of both display lines. The selected
display line shouldn't matter. The MDF setting shouldn't matter.

But none of the above is actually CHIRP related. I would be happy to
discuss non-CHIRP stuff off-line. Just email me direct.

Jim KC9HI