[chirp_users] Programming The TYT th 9800
Glenn Ervin
Thu Dec 6 12:53:26 PST 2018
Hi,
Note that I asked the question "generally", meaning that I don't know if we need to program in standard frequencies with something like 5KHZ divisions, or if areas use any given frequency. I realize that repeaters are area specific, LOL.
----- Original Message -----
From: John Wuest <jhwuest at gmail.com>
To: chirp users <chirp_users at intrepid.danplanet.com>
Sent: Thu, 06 Dec 2018 15:47:38 -0500 (EST)
Subject: Re: [chirp_users] Programming The TYT th 9800
Local to where? We don't know where you are located.
On Thu, Dec 6, 2018 at 2:56 PM Glenn Ervin <glennervin at cableone.net> wrote:
> Hello,
> I will be getting the TYT 9800 with a programming cable.
> I have programmed my Baofengs with Chirp, so I know how to use the program
> in general.
> I'm wondering if I can import the .CSV file for any of my Baofengs into
> Chirp when I have downloaded from the TYT, or if the Baofeng radios have
> settings that won't sit well in the TYT.
> Also, this radio has 6-meter and 10-meter, and I can look at Radio
> Reference, but does anyone know if generally, there are any local
> frequencies that are in these bands?
> Thanks.
>
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to John Wuest at jhwuest at gmail.com
> To unsubscribe, send an email to
> chirp_users-unsubscribe at intrepid.danplanet.com
More information about the chirp_users
mailing list