[chirp_users] uv-82 settings does not show up using latest build

Fri Apr 27 17:14:13 PDT 2018

Well I did this, see below, and it worked.
Edit uv5r.py and line 1662 change the 123 to 255. I was able to do a complete read with no errors. The problem was in the UHF squelch settings is was set by default to 208. I left the default as 208.

-------- Original message --------
From: Jim Unroe <rock.unroe at gmail.com> 
Date: 4/27/18  12:48  (GMT-06:00) 
To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com> 
Subject: Re: [chirp_users] uv-82 settings does not show up using latest build 

On Fri, Apr 27, 2018 at 12:39 PM, aj4ck1 <aj4ck1 at gmail.com> wrote:
> Is there anyway that I can do this, like remove the battery for 24 hrs. The
> "geek" in me wants to know

You have to edit the CHIRP Radio Images (*.ing) file with a hex editor
to correct the invalid value(s).

chirp_users mailing list
chirp_users at intrepid.danplanet.com
This message was sent to aj4ck1 at gmail.com at aj4ck1 at gmail.com
To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20180427/defea486/attachment.html 

More information about the chirp_users mailing list