[chirp_users] Issue with programming Baofeng UV-82HP

[Ernst Wittenschläger]

Hi All,
I am using CHIRP to program in all of my repeaters into the UV-82HP. I ran
into an issue: When loading in the CTCSS Codes to "unlock" the repeater,
the software will load the CTCSS code on BOTH the Receive CTCSS (R-CTCS,
Menu 11) and Transmit CTCSS (T-CTCS, Menu 13), instead of ONLY the T-CTCS,
so I am unable to receive any signal coming back from the repeaters.
Afterwards, when I try to change the R-CTCS to 0.000 Hz, it will
automatically switch back to the programmed R-CTCS code when I exit the
Menu. I have not seen in CHIRP a way to program EITHER the R-CTCS or the
T-CTCS, there's only one called:TSQL, which seemingly changes both the
R-CTCS & the T-CTCS

Is there a way where I can change my R-CTCS codes back to 0.000 Hz and save
the setting permanently in my radio?

Thanks & 73!
Ernst
WA3FAW
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20180423/b3653c5d/attachment.html