[chirp_users] Unable to upload to VX-5R

[Fuchs Ira]

My driver looks like this:

USB-Serial Controller:

  Product ID:	0x2303
  Vendor ID:	0x067b  (Prolific Technology, Inc.)
  Version:	3.00
  Speed:	Up to 12 Mb/sec
  Manufacturer:	Prolific Technology Inc.
  Location ID:	0x14600000 / 8
  Current Available (mA):	500
  Current Required (mA):	100
  Extra Operating Current (mA):	0


> On Apr 21, 2018, at 2:41 PM, Jean-Paul Louis via chirp_users <chirp_users at intrepid.danplanet.com> wrote:
> 
> OK,
> Now the only thing left is the USB_Serial driver.
> Mine shows up on the system info app as
> 
> FT232R USB UART:
> 
>  Product ID:	0x6001
>  Vendor ID:	0x0403  (Future Technology Devices International Limited)
>  Version:	6.00
>  Serial Number:	AI03E0C2
>  Speed:	Up to 12 Mb/sec
>  Manufacturer:	FTDI
>  Location ID:	0x14100000 / 20
>  Current Available (mA):	500
>  Current Required (mA):	90
>  Extra Operating Current (mA):	0
> 
> So I loaded the latest FTDI driver from the FTDI website, and everything has been fine since.
> 
> A friend of mine had a cheap interface with a chip from Prolific, and I had a heck of a time to find the right driver, but I made it work eventually when I used a driver from Prolific website.
> 
> So your mileage might vary.
> 
> Good luck,
> Jean-Paul
> N1JPL
> 
> 
>> On Apr 20, 2018, at 11:24 PM, Fuchs Ira <irafuchs at gmail.com> wrote:
>> 
>> The volume is at max and it still dies about 3/4 of the way to completing the upload.
>> 
>> As far as trying "another Chirp program" due to a driver issue, I’m not sure where that would be found or what to try.
>> 
>> 
>>> On Apr 20, 2018, at 8:43 PM, Jean-Paul Louis via chirp_users <chirp_users at intrepid.danplanet.com> wrote:
>>> 
>>> Ira,
>>> Do you have the volume up to the max on the radio? I have seen upload fails when volume is too low
>>> 
>>> Jean-Paul
>>> 
>>> 
>>>> On Apr 20, 2018, at 2:42 PM, Ira Fuchs <irafuchs at gmail.com> wrote:
>>>> 
>>>> It’s
>>> 
>>> _______________________________________________
>>> chirp_users mailing list
>>> chirp_users at intrepid.danplanet.com
>>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>>> This message was sent to Ira Fuchs at irafuchs at gmail.com
>>> To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
>> 
>> _______________________________________________
>> chirp_users mailing list
>> chirp_users at intrepid.danplanet.com
>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>> This message was sent to Jean-Paul Louis at louijp at yahoo.com
>> To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
> 
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to Ira Fuchs at irafuchs at gmail.com
> To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20180421/899c8847/attachment.html