[chirp_users] Unable to upload to VX-5R

[aj4ck1]

This normally means the driver and the program had a problem. If the driver is from Prolific, try different "chirp" program 

-------- Original message --------
From: Ira Fuchs <irafuchs at gmail.com> 
Date: 4/20/18  13:42  (GMT-06:00) 
To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com> 
Subject: Re: [chirp_users] Unable to upload to VX-5R 

It’s not the connection as it consistently works for download from HT and consistently dies on upload. Worse yet, when it stops mid cloning, the app cannot be canceled. I can force quit it but then the usb serial port is no longer usable and the machine must be rebooted to try again. 
On Apr 20, 2018, at 2:33 PM, Tom Hayward <tom at tomh.us> wrote:

On Fri, Apr 20, 2018 at 6:21 AM, Ira Fuchs <irafuchs at gmail.com> wrote:
RadioError: Failed to communicate with the radio: (9, 'Bad file descriptor')



ERROR: ----------------

ERROR: Clone failed: Failed to communicate with the radio: (9, 'Bad file descriptor')
I think that means your USB serial cable went away during the transfer. What chipset USB serial cable is it? Maybe someone else who understands the Prolific/FTDI driver more can comment.
Tom KD7LXL
_______________________________________________
chirp_users mailing list
chirp_users at intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to Ira Fuchs at irafuchs at gmail.com
To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20180420/9b9e3ff6/attachment.html