[chirp_users] Wouxun KG-UV8D Won't Open Squelch

[Jeff]

Sorry, let me put that more clearly: You don't want to see DTCS anywhere in the Cross Mode column, or the Tone Mode column.

On April 2, 2018 4:18:52 PM UTC, Jeff <wireless3.14159 at gmail.com> wrote:
>Or None on the Tone Mode if you're not using any.
>
>On April 2, 2018 4:16:44 PM UTC, Jeff <wireless3.14159 at gmail.com>
>wrote:
>>If  Cross Mode is other than Tone->Tone this could happen. And Tone
>>Mode should be set to Tone of course.
>>
>>On April 2, 2018 4:05:26 PM UTC, Joe Hobart <nova at npgcable.com> wrote:
>>>Chirp appears to program the KG-UV8D (Chirp reports software version
>>>UV8DV1.05),
>>>but received signals will not open the squelch.  I have to manually
>go
>>>to every
>>>channel in the radio and change either R-CTC or R-DCS before there is
>>>audio (the
>>>monitor button also works).  Three of these radios behave the same. 
>I
>>>have no
>>>other versions of Wouxan img files.
>>>
>>>Once I fiddle with the R-CTC or R-DCS settings the radios receive
>>>normally, but
>>>changing 100 channels in each of 3 radios would be tedious.
>>>
>>>Known history: These radios were purchased new, used for local
>>>communications,
>>>and retired with broken antennas.
>>>
>>>
>>>Chirp procedure using a recently updated Linux Mint version:
>>>
>>>There are no values visible in the Chirp spreadsheet for CTS or DCS.
>>>
>>>Download img file from Wouxan
>>>Delete old frequencies
>>>Add about 100 frequencies (copied from UV-5R file)
>>>Upload to same Wouxan
>>>
>>>What might I be doing wrong, and what can I do to correct this
>>problem?
>>>
>>>Thanks,
>>>Joe, W7LUX
>>>_______________________________________________
>>>chirp_users mailing list
>>>chirp_users at intrepid.danplanet.com
>>>http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>>>This message was sent to Jeff at wireless3.14159 at gmail.com
>>>To unsubscribe, send an email to
>>>chirp_users-unsubscribe at intrepid.danplanet.com