[chirp_users] Radioddity QB25 NOT QYT KT7900D

[W8RGB Gary]

The set up is Windows.


The Radioddity SW works as well as it can: reads and writes but crashes at Ch 135... Channels before that write Okay.


It is NOT a driver issue.


Why does Chirp (ver 3/31) change the Radioddity QB25 to QYT Kt7900D?  When I first purchased the radio last September, I tried to Chirp using KT7900D with no luck.



    73  Gary  W8RGB


________________________________
From: chirp_users-bounces at intrepid.danplanet.com <chirp_users-bounces at intrepid.danplanet.com> on behalf of Jim Unroe <rock.unroe at gmail.com>
Sent: Sunday, April 1, 2018 17:43
To: Discussion of CHIRP
Subject: Re: [chirp_users] Radioddity QB25 NOT QYT KT7900D

On Sun, Apr 1, 2018 at 4:58 PM, W8RGB Gary <W8RGB at live.com> wrote:
> So I get one of those Radioddity QB25 radios. I was so glad to see that
> Chirp supports it!
>
> When I choose "Download from Radio," I can select Radioddity and QB25. When
> I select "OK," the
>     display shows QYT and KT7900D
>     the Radio Identification is successful
>     about 1/3 through the 'cloning' this error occurs...
>          Invalid header at block x1180
> What is the process for programing this radio?
>
> Thank you!
>
>     73  Gary  W8RGB

Hi Gary,

You didn't provide any details about your setup. Assuming you are
using Windows and probably purchased the programming cable from
Radioddity, I would imaging that this is a driver issue. If the
programming cable with manufactured with a counterfeit Prolific chip,
you must download, install and select the Prolific v3.2.0.0 device
driver. The driver automatically installed by Windows is intentionally
incompatible with counterfeit Prolific chips.

This page has a link to the driver and instructions for installing it:
http://www.miklor.com/COM/UV_Drivers.php

I have multiple Prolific driver versions installed and switch between
then a will to test for counterfeit Prolific type chips. Nearly all
programming cables that identify themselves to Windows as having a
Prolific chip in them is made with the counterfeit chip. I keep the
v3.2.0.0 driver selected for daily use because it works for both the
unauthorized chip copy as well as the rare genuine Prolific chip.

Jim KC9HI
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20180401/edc4e908/attachment.html