[chirp_users] Cannot read Baofeng BF-888S

Joe Puma
Sun May 21 10:59:32 PDT 2017


Lol


Sent from my iPhone

> On May 20, 2017, at 6:06 PM, Jim McCorison <jimmcc at mccorison.com> wrote:
> 
> Wow! What a polite request. I just can't  try and help you fast enough. 
> 
> Not. 
> 
> Jim McCorison
> Orcas Island, WA
> 
>> On May 20, 2017, at 2:59 PM, Rich Baker <rbakedq at gmail.com> wrote:
>> 
>> Unsubscribe me from this list NOW.    
>> 
>>> On Sat, May 20, 2017 at 3:36 PM, Jim Unroe <rock.unroe at gmail.com> wrote:
>>> On Sat, May 20, 2017 at 11:08 AM, Herb Gerhardt <hgerhardt at wavecable.com> wrote:
>>> > I have been fighting similar problems on Win10 on my Baofeng UV-5R+.  I too
>>> > rolled back the driver to 3.2.0.0 to get my "genuine" cable that I purchase
>>> > from HRO to work once I upgraded to Win10.  It worked fine on Win7 and never
>>> > had a problem with the latest driver but would not work on Win10 till I
>>> > rolled the driver back.  I then turned off the auto driver updates for this
>>> > device.  Everything worked fine after rolling the driver back.
>>> >
>>> > A few months later when I tried to read the radio again, it would not
>>> > connect.  I checked the driver and it was still the 3.2.0.0 driver in my
>>> > listing.  It took me several days till I updated the driver to the latest
>>> > driver which of course did not work, but when I rolled it back again the
>>> > 3.2.0.0 driver from the pick list for this device, it began to work again.
>>> > Don't ask me what is going on but then set it back for auto updates.  I will
>>> > now just roll the driver back every time I want to use this cable.
>>> >
>>> > I suggest you try to update your driver and then roll it back again to
>>> > 3.2.0.0 to see if that works for you.  I know it sounds stupid but it is
>>> > worth a try since it worked for me.
>>> >
>>> >
>>> > Herb, KB7UVC
>>> > NW APRS Group, West Sound Coordinator
>>> > Our WEB Site:  http://blog.nwaprs.info/
>>> 
>>> There is no need to disable updates. If Windows does update your
>>> Prolific driver, the previous driver is still installed. All you have
>>> to do is go into Device Manager and re-select the driver version that
>>> you want to use. I keep several Prolific driver versions installed and
>>> switch between then at will for testing purposes.
>>> 
>>> Jim KC9HI
>>> 
>>> _______________________________________________
>>> chirp_users mailing list
>>> chirp_users at intrepid.danplanet.com
>>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>>> This message was sent to Rich at rbakedq at gmail.com
>>> To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
>> 
>> 
>> 
>> -- 
>> S. Richard Baker
>> 250 Furnace Dock Road
>> Cortlandt Manor, NY 10567
>> 
>> Home: 914-736-1350
>> Cell:    917-922-2463
>> Email:  rbakedq at gmail.com
>> _______________________________________________
>> chirp_users mailing list
>> chirp_users at intrepid.danplanet.com
>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>> This message was sent to K2SON at jimmcc at mccorison.com
>> To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to Joe Puma at theprogramllc at yahoo.com
> To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20170521/161a0e09/attachment.html 


More information about the chirp_users mailing list