[chirp_users] Cannot read Baofeng BF-888S

[Rich Baker]

Tried to unsubscribe over 10 times both on the website and by sending
emails.

On Sat, May 20, 2017 at 6:06 PM, Jim McCorison <jimmcc at mccorison.com> wrote:

> Wow! What a polite request. I just can't  try and help you fast enough.
>
> Not.
>
> Jim McCorison
> Orcas Island, WA
>
> On May 20, 2017, at 2:59 PM, Rich Baker <rbakedq at gmail.com> wrote:
>
> Unsubscribe me from this list NOW.
>
> On Sat, May 20, 2017 at 3:36 PM, Jim Unroe <rock.unroe at gmail.com> wrote:
>
>> On Sat, May 20, 2017 at 11:08 AM, Herb Gerhardt <hgerhardt at wavecable.com>
>> wrote:
>> > I have been fighting similar problems on Win10 on my Baofeng UV-5R+.  I
>> too
>> > rolled back the driver to 3.2.0.0 to get my "genuine" cable that I
>> purchase
>> > from HRO to work once I upgraded to Win10.  It worked fine on Win7 and
>> never
>> > had a problem with the latest driver but would not work on Win10 till I
>> > rolled the driver back.  I then turned off the auto driver updates for
>> this
>> > device.  Everything worked fine after rolling the driver back.
>> >
>> > A few months later when I tried to read the radio again, it would not
>> > connect.  I checked the driver and it was still the 3.2.0.0 driver in my
>> > listing.  It took me several days till I updated the driver to the
>> latest
>> > driver which of course did not work, but when I rolled it back again the
>> > 3.2.0.0 driver from the pick list for this device, it began to work
>> again.
>> > Don't ask me what is going on but then set it back for auto updates.  I
>> will
>> > now just roll the driver back every time I want to use this cable.
>> >
>> > I suggest you try to update your driver and then roll it back again to
>> > 3.2.0.0 to see if that works for you.  I know it sounds stupid but it is
>> > worth a try since it worked for me.
>> >
>> >
>> > Herb, KB7UVC
>> > NW APRS Group, West Sound Coordinator
>> > Our WEB Site:  http://blog.nwaprs.info/
>>
>> There is no need to disable updates. If Windows does update your
>> Prolific driver, the previous driver is still installed. All you have
>> to do is go into Device Manager and re-select the driver version that
>> you want to use. I keep several Prolific driver versions installed and
>> switch between then at will for testing purposes.
>>
>> Jim KC9HI
>>
>> _______________________________________________
>> chirp_users mailing list
>> chirp_users at intrepid.danplanet.com
>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>> This message was sent to Rich at rbakedq at gmail.com
>> To unsubscribe, send an email to chirp_users-unsubscribe at intrep
>> id.danplanet.com
>>
>
>
>
> --
> S. Richard Baker
> 250 Furnace Dock Road
> Cortlandt Manor, NY 10567
>
> Home: 914-736-1350 <(914)%20736-1350>
> Cell:    917-922-2463 <(917)%20922-2463>
> Email:  rbakedq at gmail.com
>
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to K2SON at jimmcc at mccorison.com
> To unsubscribe, send an email to chirp_users-unsubscribe@
> intrepid.danplanet.com
>
>
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to Rich at rbakedq at gmail.com
> To unsubscribe, send an email to chirp_users-unsubscribe@
> intrepid.danplanet.com
>



-- 
S. Richard Baker
250 Furnace Dock Road
Cortlandt Manor, NY 10567

Home: 914-736-1350
Cell:    917-922-2463
Email:  rbakedq at gmail.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20170520/70cc1511/attachment.html