[chirp_users] Help

[Stan M]

NO you can't

On Mon, May 8, 2017 at 10:34 AM, Tom Consodine via chirp_users <
chirp_users at intrepid.danplanet.com> wrote:

> Any of the 200 memory channels or any VFO frequency can be displayed in
> any of the four (A B C D) display lines. It isn't four separate banks.
> You can't force one display line to only show certain channels or bands.
> You have to select A B C or D then select what channel you want.
> It's just like the UV-5R or UV-82 with the two (A and B) display lines.
>
> Tom ND5Y
>
> On 05/08/2017 10:12 AM, Brewster wrote:
> > Let me ask the question another way. Is it possible to put _only_ the
> > frequencies for the different bands in each memory slot? Eg. 144 Mhz in
> > slot A, 220 Mhz. in slot B, GMRS in memory C, and 440 Mhz. in memory D.
> > Why would the factory supply a radio with four different memories,
> > advertized as a different band for each memory?
> > I understand that you can upload all your frequencies into the radio and
> > use the channel knob to go to each frequency, the problem being is all
> > the different memories contain the same channels.
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to stan at qslstan at gmail.com
> To unsubscribe, send an email to chirp_users-unsubscribe@
> intrepid.danplanet.com
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20170508/620086e5/attachment.html