[chirp_users] BF 888s and UV5R

[Nate Alvin]

Hi Don,  i think in the end its just the 888 being crabby.  They worked
with chirp 6 weeks ago, now they dont.  Same cord, same driver, same
computer.  I got them reprogrammed with the oem software so i will just use
that for the 888 and chirp for the others.  Thanks

On May 2, 2017 23:36, "Don Weber" <831forsale at gmail.com> wrote:

> I bought a set of the 888s that I could not use chirp with too, I just got
> an Amazon refund and ordered another set which worked, as I recall the ones
> with a particular color sticker in the battery compartment was  the ones
> that don't work, sorry it's kind of vague recollection
>
>
> Sent from my iPhone
>
> On May 2, 2017, at 1:30 PM, Nate Alvin <mypersonalspamfilternc at gmail.com>
> wrote:
>
> Tried 25+ times.  The baofeng software works so thats what i will use
>
> On May 2, 2017 15:00, "Andrew" <ziltro at ziltro.com> wrote:
>
>> Hi,
>>
>> The simple answer is: Try again. Maybe a few times.
>>
>> I don't know why, but sometimes the BF-888S radios don't like to enter
>> programming mode every time. I think this problem affects Windows more
>> than Linux. I've only used CHIRP on Linux.
>>
>> You are correct that if you can program a UV-5R then you know the cable
>> works. Both the UV-5R and the BF-888S use the same cable and 9600 baud.
>> Even just reading data from the radio requires the computer to transmit
>> serial data to the radio and receive data back from it which proves that
>> all three wires are working.
>>
>> It doesn't matter which channel the radio is set to. I have just tried
>> all 16 channels and it works on every one of them.
>>
>> What I did find is that every time you read from the radio, it reboots.
>> Data transfer doesn't work during boot-up, which seems to take around 6
>> seconds. Because the serial cable is plugged in it is muting the speaker
>> so you can't hear it saying "Power on...".
>>
>> And before anyone suggests another bit of common superstition, no it
>> doesn't matter what you have the volume level set to.
>>
>> It is of course possible that they have changed the way the radio works
>> (although for something that cheap and simple, I doubt it), or that the
>> one radio you have has a physical problem with one or both of the
>> connectors.
>>
>> --
>>
>> Andrew.
>>
>>
>> On 01/05/17 16:50, Nate Alvin wrote:
>> > About 6 weeks ago, i purchased the 2 radios listed in the subject line
>> > to test them out for work.  I programmed them both to the frequencies
>> > assigned to our license.  We were assigned a corporate license
>> > recently, with different frequencies, vs our stand alone site license
>> > which is going to expire.  Using the same computer, same "fake
>> > prolific" Baofeng cloning cable and the updated daily CHIRP software i
>> > was able to reprogram the UV5R, but when i went to read the BD888S i
>> > received the error message "radio refused to enter programming mode".
>> > Any help would be appreciated.  Thanks
>>
>> _______________________________________________
>> chirp_users mailing list
>> chirp_users at intrepid.danplanet.com
>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>> This message was sent to N.C. at mypersonalspamfilternc at gmail.com
>> To unsubscribe, send an email to chirp_users-unsubscribe at intrep
>> id.danplanet.com
>>
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to Don at 831forsale at gmail.com
> To unsubscribe, send an email to chirp_users-unsubscribe@
> intrepid.danplanet.com
>
>
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to N.C. at mypersonalspamfilternc at gmail.com
> To unsubscribe, send an email to chirp_users-unsubscribe@
> intrepid.danplanet.com
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20170503/7007a35c/attachment.html