[chirp_users] Chirp 20170311 IC W32A Upload hangs @ 7

[Joe Puma]

Try different versions of the driver if you could. Try to change buffers on prolific driver if you have the option in Mac Enviorment 

Good luck. 


Sent from my iPhone

> On Mar 18, 2017, at 2:26 PM, bob <bob at kalkwarf.com> wrote:
> 
> Hi All,
> I am attempting to program my IC W32A as follows
> 
> 1.  MacBookPro 2009 running ElCapitan
> 2. ‘REAL” Prolific USB Serial pigtail using RT DB9 version of cable for IC W32A
> 3. Radio Responds and Download Works well 0-99 channels.  I only have one or two hand programmed
> 4. When I Upload it seems to be working okay until the count goes to 7.  At that point The spinning ball of hang appears.
> 
> I can Force quit Chirp but cannot run another attempt without rebooting OS X El Capitan.  It is 100% reproducible and consistent in stopping at sequence  7 on the Icom Display.
> Ico Serial Number is 0505209.  I read all posts and found a similar report about 3 years ago with no resolution.  Any thoughts or advice.
> 
> 73 Bob k7au Lacey, Wa
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to Joe Puma at theprogramllc at yahoo.com
> To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com