[chirp_users] Duplex "off" option

[Mike Kartchner]

Simple test press the tx an see if your red indicator light come on (if not
it is not broadcasting)
but I have noticed in some cases (if before you set it to off) it was at +
or -, it will not reset to that same + or -, it will go to o in some
repeater cases that need that + or - setting an the off set factor.

On Thu, Mar 9, 2017 at 4:47 PM, Richard B. Booth <cqw6rkk at gmail.com> wrote:

> For the Baofeng UV-5R and variants……..when programming a simplex frequency
> channel…… will setting the Duplex option in CHIRP to “Off” result in
> suppressing the TX in simplex operations?
>
>
>
> The reason for asking is as follows: I have several police and fire freqs
> programmed into my radios, i.e., simplex. I want to make sure that even if
> I make a mistake and hit the TX key, I will not TX on these freqs.
>
>
>
> I have in the past programmed these memory channels using split mode and
> setting the TX on a dummy freq well away from the agency RX/TX freq.
>
>
>
> Thanks for any help !!
>
>
>
>
>
>
>
> Notice: This message content and attachments are intended for the sole use
> of the intended recipient(s).
>
> Any use by unauthorized persons is prohibited and may be unlawful.
> Forwarding of this email without the
>
> permission of the sender, original sender, or author is not authorized.
> Forwarding without permission negates
>
> all liability, stated or implied, as applicable to the sender, original
> sender, or author.
>
>
>
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to Mike Kartchner at masterwulfe at gmail.com
> To unsubscribe, send an email to chirp_users-unsubscribe@
> intrepid.danplanet.com
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20170309/0674cd8d/attachment.html