[chirp_users] PL tone 146.3 not available to use

[Kyle Colyer]

Ok I can receive just fine with the 146.2 tone and when I transmit it hits
the repeater and sounds like voice should be coming but nothing is being
said. Then when you let off the key it make sound like you hit the repeater
just no voice. It must be another setting in the btech that is not right.
Other frequency and channels work fine just not this one ??

Any ideas

On Fri, Jun 30, 2017 at 3:52 PM Kyle Colyer <colyer.kyle at gmail.com> wrote:

> When I use the 146.2 or 146.3 it will key up another radio and everything
> seems right just no sound comes thru the mic to the other end. You can hear
> it squelch and everything just no voice
>
> On Fri, Jun 30, 2017 at 2:15 PM Chuck Hast <kp4djt at gmail.com> wrote:
>
>> Here is a list:
>> CTCSS (*Continuous Tone-Coded Squelch System) Codes*
>> CTCSS Hz   CTCSS Hz   CTCSS Hz
>> 1 67.0   14 107.2   27 167.9
>> 2 71.9   15 110.9   28 173.8
>> 3 74.4   16 114.8   29 179.9
>> 4 77.0   17 118.8   30 186.2
>> 5 79.7   18 123   31 192.8
>> 6 82.5   19 127.3   32 203.5
>> 7 85.4   20 131.8   33 210.7
>> 8 88.5   21 136.5   34 218.1
>> 9 91.5   22 141.3   35 225.7
>> 10 94.8   23 146.2   36 233.6
>> 11 97.4   24 151.4   37 241.8
>> 12 100.0   25 156.7   38 250.3
>> 13 103.5   26 162.2   122* 69.3
>>
>> *Some radios use 69.4 Hz instead, which better fits the harmonic
>> sequence, and this tone is often omitted as a choice.
>> Info taken from:
>> http://www.hitechwireless.com/ctcss-codes/
>>
>> I used this one because the table was less complicated. But all you
>> need to do to see the CTCSS standard tones is google CTCSS.
>>
>>
>> On Fri, Jun 30, 2017 at 10:37 AM, Bill Gabbard <wcgabbard1 at windstream.net
>> > wrote:
>>
>>> *Try 141.3, no such 146.3!!!!!*
>>>
>>> ----- Original Message -----
>>> *From:* Kyle Colyer <colyer.kyle at gmail.com>
>>> *To:* Discussion of CHIRP <chirp_users at intrepid.danplanet.com> ; Tom
>>> Consodine <nd5y at yahoo.com>
>>> *Sent:* Friday, June 30, 2017 11:19 AM
>>> *Subject:* Re: [chirp_users] PL tone 146.3 not available to use
>>>
>>> No it is 146.3. The repeater site is managed by a company and they said
>>> it is 146.3. It works on 146.3 on my handheld boafeng.
>>>
>>> On Fri, Jun 30, 2017 at 6:16 AM Tom Consodine via chirp_users <
>>> chirp_users at intrepid.danplanet.com> wrote:
>>>
>>>> Do you mean 146.2?
>>>> 146.3 isn't a standard tone.
>>>>
>>>> Tom ND5Y
>>>>
>>>> On 06/29/2017 11:28 PM, Kyle Colyer wrote:
>>>> > Hello.
>>>> >
>>>> > I have a baofeng hp 82 and I used the older software to program it and
>>>> > it works great with our repeater. Then I got a btech 50 and downloaded
>>>> > the chirp software to program it but I cannot get it to work right off
>>>> > our repeater.  One of the problems is that the pl tone box only has a
>>>> > drop down box and preset pl tones and ours is 146.3. I can't figure
>>>> out
>>>> > how to put that tone in the chirp program. I have tried to manually
>>>> > input it into the radio itself and it won't work. I had this problem
>>>> > with the bf82 also before I got the software and programmed it with
>>>> the
>>>> > computer instead of putting it into the radio. Can anyone help?
>>>> _______________________________________________
>>>> chirp_users mailing list
>>>> chirp_users at intrepid.danplanet.com
>>>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>>>> This message was sent to KRC at colyer.kyle at gmail.com
>>>> To unsubscribe, send an email to
>>>> chirp_users-unsubscribe at intrepid.danplanet.com
>>>>
>>> ------------------------------
>>>
>>> _______________________________________________
>>> chirp_users mailing list
>>> chirp_users at intrepid.danplanet.com
>>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>>> This message was sent to BillG226 at wcgabbard1 at windstream.net
>>> To unsubscribe, send an email to
>>> chirp_users-unsubscribe at intrepid.danplanet.com
>>>
>>>
>>> _______________________________________________
>>> chirp_users mailing list
>>> chirp_users at intrepid.danplanet.com
>>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>>>
>> This message was sent to Chuck Hast at kp4djt at gmail.com
>>
>>
>>> To unsubscribe, send an email to
>>> chirp_users-unsubscribe at intrepid.danplanet.com
>>>
>> _______________________________________________
>> chirp_users mailing list
>> chirp_users at intrepid.danplanet.com
>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>> This message was sent to KRC at colyer.kyle at gmail.com
>> To unsubscribe, send an email to
>> chirp_users-unsubscribe at intrepid.danplanet.com
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20170701/b2dfed43/attachment.html