[chirp_users] "radio did not respond"

[Shawn Lynch]

also it states for the radio to be off, connected then turned back on, i
got a couple error messages if I didnt do it that exact way

On Fri, Jul 28, 2017 at 2:41 PM, Bill Walter <bllwltr at gmail.com> wrote:

> Paul,
>      Remove and reinsert the connector on the F8-hp.  I recently purchased
> the unit and I found the connector to be too snug to go all the way in at
> first.  It becomes easier to work with in time.
> Bill
> N4DHP
> > On Jul 28, 2017, at 2:25 PM, Paul Veltman <stumpie1 at sbcglobal.net>
> wrote:
> >
> > Hello all,
> >
> > I received a list error message that my post to the list was denied so I
> > am posting it again.  I apologize if it got posted twice.
> >
> > I just purchased a BaoFeng BF-F8HP and am trying to program it with
> > Chirp.  I followed the instructions and a pop up said "cloning" Then an
> > error message popped up that said "radio did not respond."  What am I
> > doing wrong here?  I am using the BaoFengTech FTDI cable on a windows 10
> > platform.
> >
> > TIA for any advice.
> >
> > Paul
> > _______________________________________________
> > chirp_users mailing list
> > chirp_users at intrepid.danplanet.com
> > http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> > This message was sent to BillW at n4dhp at arrl.net
> > To unsubscribe, send an email to chirp_users-unsubscribe@
> intrepid.danplanet.com
>
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to Shawn at slynch at bridgeportequip.com
> To unsubscribe, send an email to chirp_users-unsubscribe@
> intrepid.danplanet.com
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20170729/84f583f4/attachment.html