[chirp_users] Older Yaesu Radios

Kenneth Strom VA3KRS
Fri Feb 3 18:54:47 PST 2017


Just to let everyone know, if you do find an older Yaesu without the FTS-17A CTCSS Tone Board (long unavailable) they are being remanufactured in China, for around $25.00 USD shipped.  The same one used in Mobiles and HTs, it was an (expensive) option as few Repeaters used it at the time 20 years ago, most having just switched over from AM to FM Mode and most Ham radios were converted single-channel Crystal radios.  Rather expensive to change Channels at around $30.00/pair.  No 1.000-channel radios existed then...


Kenneth Strom   VA3KRS

________________________________
From: chirp_users-bounces at intrepid.danplanet.com <chirp_users-bounces at intrepid.danplanet.com> on behalf of chirp_users-request at intrepid.danplanet.com <chirp_users-request at intrepid.danplanet.com>
Sent: February 3, 2017 3:00 PM
To: chirp_users at intrepid.danplanet.com
Subject: chirp_users Digest, Vol 98, Issue 3

Send chirp_users mailing list submissions to
        chirp_users at intrepid.danplanet.com

To subscribe or unsubscribe via the World Wide Web, visit
        http://intrepid.danplanet.com/mailman/listinfo/chirp_users
or, via email, send a message with subject or body 'help' to
        chirp_users-request at intrepid.danplanet.com

You can reach the person managing the list at
        chirp_users-owner at intrepid.danplanet.com

When replying, please edit your Subject line so it is more specific
than "Re: Contents of chirp_users digest..."


Today's Topics:

   1. Re: chirp_users Digest, Vol 98, Issue 2 (Steve Forcier)
   2. Re: chirp_users Digest, Vol 98, Issue 2 (dbarlow_2000 at yahoo.com)
   3. Advice? (Hans White)
   4. Re: Advice? (Douglas Haviland)
   5. Re: Advice? (John Wilkerson)
   6. Re: Advice? (Tom Hayward)
   7. difference between FT-1802 and FT-1802M???? (clowery at va.net)
   8. Re: difference between FT-1802 and FT-1802M???? (nigel at forges.ca)
   9. Re: difference between FT-1802 and FT-1802M???? (Tom Hayward)
  10. Re: difference between FT-1802 and FT-1802M???? (clowery)
  11. Re: difference between FT-1802 and FT-1802M???? (Tom Hayward)


----------------------------------------------------------------------

Message: 1
Date: Thu, 2 Feb 2017 14:20:03 -0700
From: "Steve Forcier" <steve4cr at gmail.com>
Subject: Re: [chirp_users] chirp_users Digest, Vol 98, Issue 2
To: <chirp_users at intrepid.danplanet.com>
Message-ID: <000901d27d9a$1fc8bad0$5f5a3070$@com>
Content-Type: text/plain;       charset="us-ascii"

Rugged 5R & Baofeng 5R are identical.
I have exported the memories to a csv and pasted and uploaded to a uv5r with
no issues
Steve

-----Original Message-----
From: chirp_users-bounces at intrepid.danplanet.com
[mailto:chirp_users-bounces at intrepid.danplanet.com] On Behalf Of
chirp_users-request at intrepid.danplanet.com
Sent: Thursday, February 2, 2017 1:00 PM
To: chirp_users at intrepid.danplanet.com
Subject: chirp_users Digest, Vol 98, Issue 2

Send chirp_users mailing list submissions to
        chirp_users at intrepid.danplanet.com

To subscribe or unsubscribe via the World Wide Web, visit
        http://intrepid.danplanet.com/mailman/listinfo/chirp_users
or, via email, send a message with subject or body 'help' to
        chirp_users-request at intrepid.danplanet.com

You can reach the person managing the list at
        chirp_users-owner at intrepid.danplanet.com

When replying, please edit your Subject line so it is more specific than
"Re: Contents of chirp_users digest..."


Today's Topics:

   1. Re: Rugged vs Baoffeng (Jim Unroe)
   2. Re: Rugged vs Baoffeng (Mark H. Harris)
   3. Re: Rugged vs Baofeng (Dave Sunde)
   4. Re: Rugged vs. Baofeng (John LaMartina)
   5. Re: Rugged vs Baoffeng (Jim Unroe)
   6. Re: help importing file (Jeff Widen)
   7. Re: Rugged vs Baoffeng (John Wilkerson)
   8. Re: help importing file (Benton)
   9. Re: Rugged vs Baoffeng (Mark H. Harris)
  10. Re: help importing file (Jeff Widen)
  11. Re: help importing file (Jim Unroe)


----------------------------------------------------------------------

Message: 1
Date: Wed, 1 Feb 2017 15:02:56 -0500
From: Jim Unroe <rock.unroe at gmail.com>
Subject: Re: [chirp_users] Rugged vs Baoffeng
To: dbarlow_2000 at yahoo.com,      Discussion of CHIRP
        <chirp_users at intrepid.danplanet.com>
Message-ID:
        <CADnO8U5GkDMwA=tASTcR9RFvShgybzFXnJtiD-LMdMKZqo1xmA at mail.gmail.com>
Content-Type: text/plain; charset=UTF-8

On Wed, Feb 1, 2017 at 1:07 PM, dbarlow_2000--- via chirp_users
<chirp_users at intrepid.danplanet.com> wrote:
> I have a Rugged RH-5R that looks to be the same radio as a Baoffeng
UV-5X3.
> What I would like to know are they the same? and and if so can I use
> chirp on my Rugged? as it is not listed on the support list.
>
> Thanks

Do you know where I can get a copy of the "factory" programming software?

Jim


------------------------------

Message: 2
Date: Wed, 1 Feb 2017 14:14:37 -0600
From: "Mark H. Harris" <harrismh777 at gmail.com>
Subject: Re: [chirp_users] Rugged vs Baoffeng
To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
Message-ID:
        <CAFq9LpkArusrohmRDaho0gKso8_u0M6zvx8XnioTg-EsEtFuAw at mail.gmail.com>
Content-Type: text/plain; charset="utf-8"

The thing about clones is that you can never be sure how "cloned" they are.



On Wed, Feb 1, 2017 at 2:02 PM, Jim Unroe <rock.unroe at gmail.com> wrote:

> On Wed, Feb 1, 2017 at 1:07 PM, dbarlow_2000--- via chirp_users
> <chirp_users at intrepid.danplanet.com> wrote:
> > I have a Rugged RH-5R that looks to be the same radio as a Baoffeng
> UV-5X3.
> > What I would like to know are they the same? and and if so can I use
> chirp
> > on my Rugged? as it is not listed on the support list.
> >
> > Thanks
>
> Do you know where I can get a copy of the "factory" programming software?
>
> Jim
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to marcus at harrismh777 at gmail.com To
> unsubscribe, send an email to chirp_users-unsubscribe@
> intrepid.danplanet.com
>



--

Kind regards,
Mark H. Harris
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20170201/70a
f21a7/attachment-0001.html

------------------------------

Message: 3
Date: Wed, 1 Feb 2017 12:30:52 -0800
From: "Dave Sunde" <dsunde at frontier.com>
Subject: Re: [chirp_users] Rugged vs Baofeng
To: <dbarlow_2000 at yahoo.com>,   "'Discussion of CHIRP'"
        <chirp_users at intrepid.danplanet.com>
Message-ID: <030001d27cca$1fc44480$5f4ccd80$@frontier.com>
Content-Type: text/plain; charset="utf-8"

The manual is here:

https://www.ruggedradios.com/PDF/Rugged-RH-5R-manual.pdf





Dave Sunde

D&G Enterprises

Senior Engineer

1-509-486-1547  Home Office

1-206-930-3887  Cell Phone



From: chirp_users-bounces at intrepid.danplanet.com
[mailto:chirp_users-bounces at intrepid.danplanet.com] On Behalf Of
dbarlow_2000--- via chirp_users
Sent: Wednesday, February 1, 2017 10:07 AM
To: chirp_users at intrepid.danplanet.com
Subject: [chirp_users] Rugged vs Baoffeng



I have a Rugged RH-5R that looks to be the same radio as a Baoffeng UV-5X3.
What I would like to know are they the same? and and if so can I use chirp
on my Rugged? as it is not listed on the support list.



Thanks

-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20170201/a1c
41c1d/attachment-0001.html

------------------------------

Message: 4
Date: Wed, 1 Feb 2017 16:43:56 -0500
From: "John LaMartina" <JohnLa at usa.net>
Subject: Re: [chirp_users] Rugged vs. Baofeng
To: "'Discussion of CHIRP'" <chirp_users at intrepid.danplanet.com>
Message-ID: <00c801d27cd4$4a811450$df833cf0$@net>
Content-Type: text/plain; charset="utf-8"

Dave,
Based on the manual, the radio is a Dual Band (where the 5X3 is 3 band).
Also, the ABR (backlight display time) maxes out at 5 seconds, where newer
models time out at 10.
Based on the manual, it appears to be a base line Baofeng UV5R.

John
http://www.miklor.com





From: chirp_users-bounces at intrepid.danplanet.com
[mailto:chirp_users-bounces at intrepid.danplanet.com] On Behalf Of Dave Sunde
Sent: Wednesday, February 01, 2017 3:31 PM
To: dbarlow_2000 at yahoo.com; 'Discussion of CHIRP'
Subject: Re: [chirp_users] Rugged vs Baofeng



The manual is here:

https://www.ruggedradios.com/PDF/Rugged-RH-5R-manual.pdf





Dave Sunde

D&G Enterprises

Senior Engineer

1-509-486-1547  Home Office

1-206-930-3887  Cell Phone



From: chirp_users-bounces at intrepid.danplanet.com
[mailto:chirp_users-bounces at intrepid.danplanet.com] On Behalf Of
dbarlow_2000--- via chirp_users
Sent: Wednesday, February 1, 2017 10:07 AM
To: chirp_users at intrepid.danplanet.com
Subject: [chirp_users] Rugged vs Baoffeng



I have a Rugged RH-5R that looks to be the same radio as a Baoffeng UV-5X3.
What I would like to know are they the same? and and if so can I use chirp
on my Rugged? as it is not listed on the support list.



Thanks

-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20170201/208
d8559/attachment-0001.html

------------------------------

Message: 5
Date: Wed, 1 Feb 2017 17:14:47 -0500
From: Jim Unroe <rock.unroe at gmail.com>
Subject: Re: [chirp_users] Rugged vs Baoffeng
To: dbarlow_2000 at yahoo.com,      Discussion of CHIRP
        <chirp_users at intrepid.danplanet.com>
Message-ID:
        <CADnO8U6zuRjBvfo8pWkgYdZs0dLyOB9Rt5WPiaOO5Mey+S2zOQ at mail.gmail.com>
Content-Type: text/plain; charset=UTF-8

On Wed, Feb 1, 2017 at 1:07 PM, dbarlow_2000--- via chirp_users
<chirp_users at intrepid.danplanet.com> wrote:
> I have a Rugged RH-5R that looks to be the same radio as a Baoffeng
UV-5X3.
> What I would like to know are they the same? and and if so can I use
> chirp on my Rugged? as it is not listed on the support list.
>
> Thanks

When visiting the Rugged Radio web site, it is easy to see that the radio
shown in the pictures was programmed using CHIRP. How can I tell, you ask?
It is programmed with 7 character channel names. The Baofeng factory
software only allows 6 character channel names.

Then on the Rugged Radio software page, the RH-5R has links for Windows,
Linus and Mac OS X programming software. The Baofeng factory software is for
Windows only. All three links point directly to very old CHIRP daily
versions (20150707).

My guess is that the RH-5R can be programmed using the latest CHIRP daily
build by selecting Vendor: Baofeng and Model: UV-5R. Confirm this and I will
add it to the list of of more then 41 UV-5R variants that use these same
selections.

http://chirp.danplanet.com/projects/chirp/wiki/Baofeng_UV5R_Variants

Jim


------------------------------

Message: 6
Date: Thu, 2 Feb 2017 00:45:49 +0000 (UTC)
From: Jeff Widen <dftd3 at yahoo.com>
Subject: Re: [chirp_users] help importing file
To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
Message-ID: <622237524.695526.1485996349508 at mail.yahoo.com>
Content-Type: text/plain; charset=UTF-8

Bill

I believe what you say is true, but you don't have to change the file you
downloaded from the radio. You can upload a different file, one of the stock
files in chirp or one you have created.

Jeff
--------------------------------------------
On Wed, 2/1/17, penningsbill at gmail.com <penningsbill at gmail.com> wrote:

 Subject: Re: [chirp_users] help importing file
 To: "Discussion of CHIRP" <chirp_users at intrepid.danplanet.com>
 Date: Wednesday, February 1, 2017, 9:25 AM

 #yiv2332876555
 v\00003a* {
 }





 I have not used it yet but I believe that you have to  export first from
your radio to your computer. That  establish a contact between the computer
and your radio.
 Then change the spreadsheet, that is a part of Chirp,?enter  all your
frequencies and then import that spreadsheet into  your radio. Please let me
know if that works as I have  ordered a beaufang from China and I will have
to do that  too.
 ?
 Bill VE7BMQ

 ?
 ?

 -------Original
 Message-------
 ?

 From:
 Judith
 Barrett
 Date:
 01/02/2017 9:17:20 AM
 To: Discussion
 of CHIRP
 Subject: Re:
 [chirp_users] help importing file
 ?
 Just a clarification because I'm doing
 the same thing - after I copy/paste into the radio csv file,  and save it
as a csv file, then I import that csv file using  Chirp. Am I importing to
Chirp or using Chirp to import to  the radio?


 On Wed, Feb 1, 2017 at
 6:10 AM, Amnon Zohar <amnon.zohar at gmail.com>
 wrote:


 Do not create the frequency list in exel!
 Download the image from the radio export it to csv file  , edit it using
exel and import that file.


 ?????? 1
 ????' 2017 13:06,? "Jeff Widen via
 chirp_users" <chirp_users at intrepid.
 danplanet.com> ???:

 I have saved a frequency list in excel as a csv  file. When I try to import
it into Chirp it says it does not  recognize the file type. I just
downloaded Chirp so I have  the most current version for windows. Any help
would be  appreciated.

 Jeff
 ______________________________
 _________________
 chirp_users mailing
 list
 chirp_users at intrepid.danplanet
 .com
 http://intrepid.danplanet.com/
 mailman/listinfo/chirp_users
 This
 message was sent to amnon at amnon.zohar at gmail.com  To unsubscribe, send an
email to chirp_users-unsubscribe at intrep  id.danplanet.com

 ______________________________
 _________________
 chirp_users mailing
 list
 chirp_users at intrepid.
 danplanet.com
 http://intrepid.danplanet.com/
 mailman/listinfo/chirp_users
 This
 message was sent to Judith at wcchick at gmail.com  To unsubscribe, send an
email to chirp_users-unsubscribe@  intrepid.danplanet.com




 --




 Have I not commanded you? Be
 strong and courageous. Do not be afraid;?do not be  discouraged,?for
the?Lord?your God will be with you  wherever you go.?? Joshua 1:9



 My blog ?http://goodforthecorn.wordpress.com/





 _______________________________________________
 chirp_users mailing list
 chirp_users at intrepid.danplanet.com
 http://intrepid.danplanet.com/mailman/listinfo/chirp_users
 This message was sent to penningsbill at gmail.com  at penningsbill at gmail.com
To unsubscribe, send an email to
chirp_users-unsubscribe at intrepid.danplanet.com
 ?











                                 This email has been checked for viruses by
Avast  antivirus software.

 www.avast.com<http://www.avast.com>





 -----Inline Attachment Follows-----

 _______________________________________________
 chirp_users mailing list
 chirp_users at intrepid.danplanet.com
 http://intrepid.danplanet.com/mailman/listinfo/chirp_users
 This message was sent to dftd3 at yahoo.com  at dftd3 at yahoo.com  To
unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com


------------------------------

Message: 7
Date: Wed, 1 Feb 2017 21:06:18 -0500
From: John Wilkerson <jl_wilkerson at att.net>
Subject: Re: [chirp_users] Rugged vs Baoffeng
To: dbarlow_2000 at yahoo.com,     Discussion of CHIRP
        <chirp_users at intrepid.danplanet.com>
Message-ID: <39f81225-5b89-10bd-ccfe-21ab585f2f03 at att.net>
Content-Type: text/plain; charset="windows-1252"

Looking at the manual, it does not have any of the extended features the
UV-5X3 has.  I'd say, it is simply a repackaged UV-5R


On 2/1/2017 13:07, dbarlow_2000--- via chirp_users wrote:
> I have a Rugged RH-5R that looks to be the same radio as a Baoffeng
> UV-5X3. What I would like to know are they the same? and and if so can
> I use chirp on my Rugged? as it is not listed on the support list.
>
> Thanks
>
>

-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20170201/9a1
b5919/attachment-0001.html

------------------------------

Message: 8
Date: Wed, 01 Feb 2017 19:28:26 -0800
From: Benton <benton at siletzbay.com>
Subject: Re: [chirp_users] help importing file
To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
Message-ID: <82a27c6ace99d3f9323bcf75bb921d02 at aracnet.com>
Content-Type: text/plain; charset=US-ASCII; format=flowed

On 2017-02-01 09:31, Tom Hayward wrote:

> If you share the file, I can point out why it's unrecognized. It most
> likely does not have the column header/labels Chirp is looking for, or
> the data in those columns is of the wrong format.

'Back in the day' I thought one of the issues with using Excel to process
csv file and Chirp was that Excel tended to truncate trailing commas for
empty fields whereas Chirp was a stickler for those being in place to make
the columns line up correctly.

Am I misremembering or have either of those issues been improved?

Benton 1feb17
--
KF7QLP
benton at siletzbay.com


------------------------------

Message: 9
Date: Thu, 2 Feb 2017 02:30:34 -0600
From: "Mark H. Harris" <harrismh777 at gmail.com>
Subject: Re: [chirp_users] Rugged vs Baoffeng
To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
Message-ID:
        <CAFq9LpnXV4nt7sxe7VPHT87A-K8-uG=W6Xhes3DpWnmNOfxntQ at mail.gmail.com>
Content-Type: text/plain; charset="utf-8"

Yeah,  and the problem really is whether the CHIRP software will be
compatible with the radio's firmware;  and there is always the possibility
that the radio will be damaged or bricked.

On Wed, Feb 1, 2017 at 8:06 PM, John Wilkerson <jl_wilkerson at att.net> wrote:

> Looking at the manual, it does not have any of the extended features
> the
> UV-5X3 has.  I'd say, it is simply a repackaged UV-5R
>
> On 2/1/2017 13:07, dbarlow_2000--- via chirp_users wrote:
>
> I have a Rugged RH-5R that looks to be the same radio as a Baoffeng
> UV-5X3. What I would like to know are they the same? and and if so can
> I use chirp on my Rugged? as it is not listed on the support list.
>
> Thanks
>
>
>
>
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to marcus at harrismh777 at gmail.com To
> unsubscribe, send an email to chirp_users-unsubscribe@
> intrepid.danplanet.com
>



--

Kind regards,
Mark H. Harris
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20170202/c6a
f10f8/attachment-0001.html

------------------------------

Message: 10
Date: Thu, 2 Feb 2017 08:55:20 +0000 (UTC)
From: Jeff Widen <dftd3 at yahoo.com>
Subject: Re: [chirp_users] help importing file
To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
Message-ID: <909413328.90358.1486025720348 at mail.yahoo.com>
Content-Type: text/plain; charset=UTF-8

I have tried changing the column headers to match those in the stock files.
When I do it seems to recognize the file but it then says no channels found.
If I change the location column back to channel it does not recognize the
file. Why can't find any channels? Does the order of the column matter?
Here are the column headers:
Location        Frequency           Offset       Duplex  Mode    Name    Show
Name    Tone Mode        Tone      DCS    Tx Power            Skip
Step
Thanks for the help,
Jeff
--------------------------------------------
On Wed, 2/1/17, Benton <benton at siletzbay.com> wrote:

 Subject: Re: [chirp_users] help importing file
 To: "Discussion of CHIRP" <chirp_users at intrepid.danplanet.com>
 Date: Wednesday, February 1, 2017, 7:28 PM

 On 2017-02-01 09:31, Tom
 Hayward wrote:

 > If you
 share the file, I can point out why it's unrecognized.
 It most
 > likely does not have the column
 header/labels Chirp is looking for, or
 >
 the data in those columns is of the wrong format.

 'Back in the day' I
 thought one of the issues with using Excel to  process csv file and Chirp
was that Excel  tended to truncate trailing  commas for  empty fields
whereas Chirp was a stickler for those being in

 place to make the columns line up
 correctly.

 Am I
 misremembering or have either of those issues been  improved?

 Benton 1feb17
 --
 KF7QLP
 benton at siletzbay.com
 _______________________________________________
 chirp_users mailing list
 chirp_users at intrepid.danplanet.com
 http://intrepid.danplanet.com/mailman/listinfo/chirp_users
 This message was sent to dftd3 at yahoo.com  at dftd3 at yahoo.com  To
unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com



------------------------------

Message: 11
Date: Thu, 2 Feb 2017 05:12:34 -0500
From: Jim Unroe <rock.unroe at gmail.com>
Subject: Re: [chirp_users] help importing file
To: Jeff Widen <dftd3 at yahoo.com>,        Discussion of CHIRP
        <chirp_users at intrepid.danplanet.com>
Message-ID:
        <CADnO8U40q4rbjzVjPARt7o+On8KrnmiH5r+PdNnf3-aZScLA5w at mail.gmail.com>
Content-Type: text/plain; charset=UTF-8

On Thu, Feb 2, 2017 at 3:55 AM, Jeff Widen via chirp_users
<chirp_users at intrepid.danplanet.com> wrote:
> I have tried changing the column headers to match those in the stock
files. When I do it seems to recognize the file but it then says no channels
found. If I change the location column back to channel it does not recognize
the file. Why can't find any channels? Does the order of the column matter?
> Here are the column headers:
> Location        Frequency           Offset      Duplex  Mode    Name
Show Name       Tone Mode       Tone      DCS   Tx Power            Skip
Step
> Thanks for the help,
> Jeff

Once again, if you would share (attach) your CSV file, Tom or I (and likely
many others) could tell you exactly what is wrong.

Jim


------------------------------

_______________________________________________
chirp_users mailing list
chirp_users at intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
To unsubscribe, send an email to
chirp_users-unsubscribe at intrepid.danplanet.com

End of chirp_users Digest, Vol 98, Issue 2
******************************************



------------------------------

Message: 2
Date: Thu, 2 Feb 2017 21:47:08 +0000 (UTC)
From: <dbarlow_2000 at yahoo.com>
Subject: Re: [chirp_users] chirp_users Digest, Vol 98, Issue 2
To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
Message-ID: <137067708.556532.1486072028278 at mail.yahoo.com>
Content-Type: text/plain; charset="utf-8"

Thanx Steve for the info

      From: Steve Forcier <steve4cr at gmail.com>
 To: chirp_users at intrepid.danplanet.com
 Sent: Thursday, February 2, 2017 2:20 PM
 Subject: Re: [chirp_users] chirp_users Digest, Vol 98, Issue 2

Rugged 5R & Baofeng 5R are identical.
I have exported the memories to a csv and pasted and uploaded to a uv5r with
no issues
Steve

-----Original Message-----
From: chirp_users-bounces at intrepid.danplanet.com
[mailto:chirp_users-bounces at intrepid.danplanet.com] On Behalf Of
chirp_users-request at intrepid.danplanet.com
Sent: Thursday, February 2, 2017 1:00 PM
To: chirp_users at intrepid.danplanet.com
Subject: chirp_users Digest, Vol 98, Issue 2

Send chirp_users mailing list submissions to
??? chirp_users at intrepid.danplanet.com

To subscribe or unsubscribe via the World Wide Web, visit
??? http://intrepid.danplanet.com/mailman/listinfo/chirp_users
or, via email, send a message with subject or body 'help' to
??? chirp_users-request at intrepid.danplanet.com

You can reach the person managing the list at
??? chirp_users-owner at intrepid.danplanet.com

When replying, please edit your Subject line so it is more specific than
"Re: Contents of chirp_users digest..."


Today's Topics:

? 1. Re: Rugged vs Baoffeng (Jim Unroe)
? 2. Re: Rugged vs Baoffeng (Mark H. Harris)
? 3. Re: Rugged vs Baofeng (Dave Sunde)
? 4. Re: Rugged vs. Baofeng (John LaMartina)
? 5. Re: Rugged vs Baoffeng (Jim Unroe)
? 6. Re: help importing file (Jeff Widen)
? 7. Re: Rugged vs Baoffeng (John Wilkerson)
? 8. Re: help importing file (Benton)
? 9. Re: Rugged vs Baoffeng (Mark H. Harris)
? 10. Re: help importing file (Jeff Widen)
? 11. Re: help importing file (Jim Unroe)


----------------------------------------------------------------------

Message: 1
Date: Wed, 1 Feb 2017 15:02:56 -0500
From: Jim Unroe <rock.unroe at gmail.com>
Subject: Re: [chirp_users] Rugged vs Baoffeng
To: dbarlow_2000 at yahoo.com, ??? Discussion of CHIRP
??? <chirp_users at intrepid.danplanet.com>
Message-ID:
??? <CADnO8U5GkDMwA=tASTcR9RFvShgybzFXnJtiD-LMdMKZqo1xmA at mail.gmail.com>
Content-Type: text/plain; charset=UTF-8

On Wed, Feb 1, 2017 at 1:07 PM, dbarlow_2000--- via chirp_users
<chirp_users at intrepid.danplanet.com> wrote:
> I have a Rugged RH-5R that looks to be the same radio as a Baoffeng
UV-5X3.
> What I would like to know are they the same? and and if so can I use
> chirp on my Rugged? as it is not listed on the support list.
>
> Thanks

Do you know where I can get a copy of the "factory" programming software?

Jim


------------------------------

Message: 2
Date: Wed, 1 Feb 2017 14:14:37 -0600
From: "Mark H. Harris" <harrismh777 at gmail.com>
Subject: Re: [chirp_users] Rugged vs Baoffeng
To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
Message-ID:
??? <CAFq9LpkArusrohmRDaho0gKso8_u0M6zvx8XnioTg-EsEtFuAw at mail.gmail.com>
Content-Type: text/plain; charset="utf-8"

The thing about clones is that you can never be sure how "cloned" they are.



On Wed, Feb 1, 2017 at 2:02 PM, Jim Unroe <rock.unroe at gmail.com> wrote:

> On Wed, Feb 1, 2017 at 1:07 PM, dbarlow_2000--- via chirp_users
> <chirp_users at intrepid.danplanet.com> wrote:
> > I have a Rugged RH-5R that looks to be the same radio as a Baoffeng
> UV-5X3.
> > What I would like to know are they the same? and and if so can I use
> chirp
> > on my Rugged? as it is not listed on the support list.
> >
> > Thanks
>
> Do you know where I can get a copy of the "factory" programming software?
>
> Jim
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to marcus at harrismh777 at gmail.com To
> unsubscribe, send an email to chirp_users-unsubscribe@
> intrepid.danplanet.com
>



--

Kind regards,
Mark H. Harris
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20170201/70a
f21a7/attachment-0001.html

------------------------------

Message: 3
Date: Wed, 1 Feb 2017 12:30:52 -0800
From: "Dave Sunde" <dsunde at frontier.com>
Subject: Re: [chirp_users] Rugged vs Baofeng
To: <dbarlow_2000 at yahoo.com>,??? "'Discussion of CHIRP'"
??? <chirp_users at intrepid.danplanet.com>
Message-ID: <030001d27cca$1fc44480$5f4ccd80$@frontier.com>
Content-Type: text/plain; charset="utf-8"

The manual is here:

https://www.ruggedradios.com/PDF/Rugged-RH-5R-manual.pdf





Dave Sunde

D&G Enterprises

Senior Engineer

1-509-486-1547? Home Office

1-206-930-3887? Cell Phone



From: chirp_users-bounces at intrepid.danplanet.com
[mailto:chirp_users-bounces at intrepid.danplanet.com] On Behalf Of
dbarlow_2000--- via chirp_users
Sent: Wednesday, February 1, 2017 10:07 AM
To: chirp_users at intrepid.danplanet.com
Subject: [chirp_users] Rugged vs Baoffeng



I have a Rugged RH-5R that looks to be the same radio as a Baoffeng UV-5X3.
What I would like to know are they the same? and and if so can I use chirp
on my Rugged? as it is not listed on the support list.



Thanks

-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20170201/a1c
41c1d/attachment-0001.html

------------------------------

Message: 4
Date: Wed, 1 Feb 2017 16:43:56 -0500
From: "John LaMartina" <JohnLa at usa.net>
Subject: Re: [chirp_users] Rugged vs. Baofeng
To: "'Discussion of CHIRP'" <chirp_users at intrepid.danplanet.com>
Message-ID: <00c801d27cd4$4a811450$df833cf0$@net>
Content-Type: text/plain; charset="utf-8"

Dave,
Based on the manual, the radio is a Dual Band (where the 5X3 is 3 band).
Also, the ABR (backlight display time) maxes out at 5 seconds, where newer
models time out at 10.
Based on the manual, it appears to be a base line Baofeng UV5R.

John
http://www.miklor.com





From: chirp_users-bounces at intrepid.danplanet.com
[mailto:chirp_users-bounces at intrepid.danplanet.com] On Behalf Of Dave Sunde
Sent: Wednesday, February 01, 2017 3:31 PM
To: dbarlow_2000 at yahoo.com; 'Discussion of CHIRP'
Subject: Re: [chirp_users] Rugged vs Baofeng



The manual is here:

https://www.ruggedradios.com/PDF/Rugged-RH-5R-manual.pdf





Dave Sunde

D&G Enterprises

Senior Engineer

1-509-486-1547? Home Office

1-206-930-3887? Cell Phone



From: chirp_users-bounces at intrepid.danplanet.com
[mailto:chirp_users-bounces at intrepid.danplanet.com] On Behalf Of
dbarlow_2000--- via chirp_users
Sent: Wednesday, February 1, 2017 10:07 AM
To: chirp_users at intrepid.danplanet.com
Subject: [chirp_users] Rugged vs Baoffeng



I have a Rugged RH-5R that looks to be the same radio as a Baoffeng UV-5X3.
What I would like to know are they the same? and and if so can I use chirp
on my Rugged? as it is not listed on the support list.



Thanks

-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20170201/208
d8559/attachment-0001.html

------------------------------

Message: 5
Date: Wed, 1 Feb 2017 17:14:47 -0500
From: Jim Unroe <rock.unroe at gmail.com>
Subject: Re: [chirp_users] Rugged vs Baoffeng
To: dbarlow_2000 at yahoo.com, ??? Discussion of CHIRP
??? <chirp_users at intrepid.danplanet.com>
Message-ID:
??? <CADnO8U6zuRjBvfo8pWkgYdZs0dLyOB9Rt5WPiaOO5Mey+S2zOQ at mail.gmail.com>
Content-Type: text/plain; charset=UTF-8

On Wed, Feb 1, 2017 at 1:07 PM, dbarlow_2000--- via chirp_users
<chirp_users at intrepid.danplanet.com> wrote:
> I have a Rugged RH-5R that looks to be the same radio as a Baoffeng
UV-5X3.
> What I would like to know are they the same? and and if so can I use
> chirp on my Rugged? as it is not listed on the support list.
>
> Thanks

When visiting the Rugged Radio web site, it is easy to see that the radio
shown in the pictures was programmed using CHIRP. How can I tell, you ask?
It is programmed with 7 character channel names. The Baofeng factory
software only allows 6 character channel names.

Then on the Rugged Radio software page, the RH-5R has links for Windows,
Linus and Mac OS X programming software. The Baofeng factory software is for
Windows only. All three links point directly to very old CHIRP daily
versions (20150707).

My guess is that the RH-5R can be programmed using the latest CHIRP daily
build by selecting Vendor: Baofeng and Model: UV-5R. Confirm this and I will
add it to the list of of more then 41 UV-5R variants that use these same
selections.

http://chirp.danplanet.com/projects/chirp/wiki/Baofeng_UV5R_Variants

Jim


------------------------------

Message: 6
Date: Thu, 2 Feb 2017 00:45:49 +0000 (UTC)
From: Jeff Widen <dftd3 at yahoo.com>
Subject: Re: [chirp_users] help importing file
To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
Message-ID: <622237524.695526.1485996349508 at mail.yahoo.com>
Content-Type: text/plain; charset=UTF-8

Bill

I believe what you say is true, but you don't have to change the file you
downloaded from the radio. You can upload a different file, one of the stock
files in chirp or one you have created.

Jeff
--------------------------------------------
On Wed, 2/1/17, penningsbill at gmail.com <penningsbill at gmail.com> wrote:

 Subject: Re: [chirp_users] help importing file
 To: "Discussion of CHIRP" <chirp_users at intrepid.danplanet.com>
 Date: Wednesday, February 1, 2017, 9:25 AM

 #yiv2332876555
 v\00003a* {
 }





 I have not used it yet but I believe that you have to? export first from
your radio to your computer. That? establish a contact between the computer
and your radio.
 Then change the spreadsheet, that is a part of Chirp,?enter? all your
frequencies and then import that spreadsheet into? your radio. Please let me
know if that works as I have? ordered a beaufang from China and I will have
to do that? too.
 ?
 Bill VE7BMQ

 ?
 ?

 -------Original
 Message-------
 ?

 From:
 Judith
 Barrett
 Date:
 01/02/2017 9:17:20 AM
 To: Discussion
 of CHIRP
 Subject: Re:
 [chirp_users] help importing file
 ?
 Just a clarification because I'm doing
 the same thing - after I copy/paste into the radio csv file,? and save it
as a csv file, then I import that csv file using? Chirp. Am I importing to
Chirp or using Chirp to import to? the radio?


 On Wed, Feb 1, 2017 at
 6:10 AM, Amnon Zohar <amnon.zohar at gmail.com>
 wrote:


 Do not create the frequency list in exel!
 Download the image from the radio export it to csv file? , edit it using
exel and import that file.


 ?????? 1
 ????' 2017 13:06,? "Jeff Widen via
 chirp_users" <chirp_users at intrepid.
 danplanet.com> ???:

 I have saved a frequency list in excel as a csv? file. When I try to import
it into Chirp it says it does not? recognize the file type. I just
downloaded Chirp so I have? the most current version for windows. Any help
would be? appreciated.

 Jeff
 ______________________________
 _________________
 chirp_users mailing
 list
 chirp_users at intrepid.danplanet
 .com
 http://intrepid.danplanet.com/
 mailman/listinfo/chirp_users
 This
 message was sent to amnon at amnon.zohar at gmail.com? To unsubscribe, send an
email to chirp_users-unsubscribe at intrep? id.danplanet.com

 ______________________________
 _________________
 chirp_users mailing
 list
 chirp_users at intrepid.
 danplanet.com
 http://intrepid.danplanet.com/
 mailman/listinfo/chirp_users
 This
 message was sent to Judith at wcchick at gmail.com? To unsubscribe, send an
email to chirp_users-unsubscribe@? intrepid.danplanet.com




 --




 Have I not commanded you? Be
 strong and courageous. Do not be afraid;?do not be? discouraged,?for
the?Lord?your God will be with you? wherever you go.?? Joshua 1:9



 My blog ?http://goodforthecorn.wordpress.com/





 _______________________________________________
 chirp_users mailing list
 chirp_users at intrepid.danplanet.com
 http://intrepid.danplanet.com/mailman/listinfo/chirp_users
 This message was sent to penningsbill at gmail.com? at penningsbill at gmail.com
To unsubscribe, send an email to
chirp_users-unsubscribe at intrepid.danplanet.com
 ?






 ??? ??? ???
 ??? ??? ??? ???
 ??? ??? ???
 ??? ???
 ??? ??? ???
 ??? ??? ??? ??? This email has been checked for viruses by
Avast? antivirus software.
 ??? ??? ??? ???
 www.avast.com<http://www.avast.com>
 ??? ??? ???
 ??? ???



 -----Inline Attachment Follows-----

 _______________________________________________
 chirp_users mailing list
 chirp_users at intrepid.danplanet.com
 http://intrepid.danplanet.com/mailman/listinfo/chirp_users
 This message was sent to dftd3 at yahoo.com? at dftd3 at yahoo.com? To
unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com


------------------------------

Message: 7
Date: Wed, 1 Feb 2017 21:06:18 -0500
From: John Wilkerson <jl_wilkerson at att.net>
Subject: Re: [chirp_users] Rugged vs Baoffeng
To: dbarlow_2000 at yahoo.com,??? Discussion of CHIRP
??? <chirp_users at intrepid.danplanet.com>
Message-ID: <39f81225-5b89-10bd-ccfe-21ab585f2f03 at att.net>
Content-Type: text/plain; charset="windows-1252"

Looking at the manual, it does not have any of the extended features the
UV-5X3 has.? I'd say, it is simply a repackaged UV-5R


On 2/1/2017 13:07, dbarlow_2000--- via chirp_users wrote:
> I have a Rugged RH-5R that looks to be the same radio as a Baoffeng
> UV-5X3. What I would like to know are they the same? and and if so can
> I use chirp on my Rugged? as it is not listed on the support list.
>
> Thanks
>
>

-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20170201/9a1
b5919/attachment-0001.html

------------------------------

Message: 8
Date: Wed, 01 Feb 2017 19:28:26 -0800
From: Benton <benton at siletzbay.com>
Subject: Re: [chirp_users] help importing file
To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
Message-ID: <82a27c6ace99d3f9323bcf75bb921d02 at aracnet.com>
Content-Type: text/plain; charset=US-ASCII; format=flowed

On 2017-02-01 09:31, Tom Hayward wrote:

> If you share the file, I can point out why it's unrecognized. It most
> likely does not have the column header/labels Chirp is looking for, or
> the data in those columns is of the wrong format.

'Back in the day' I thought one of the issues with using Excel to process
csv file and Chirp was that Excel tended to truncate trailing commas for
empty fields whereas Chirp was a stickler for those being in place to make
the columns line up correctly.

Am I misremembering or have either of those issues been improved?

Benton 1feb17
--
KF7QLP
benton at siletzbay.com


------------------------------

Message: 9
Date: Thu, 2 Feb 2017 02:30:34 -0600
From: "Mark H. Harris" <harrismh777 at gmail.com>
Subject: Re: [chirp_users] Rugged vs Baoffeng
To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
Message-ID:
??? <CAFq9LpnXV4nt7sxe7VPHT87A-K8-uG=W6Xhes3DpWnmNOfxntQ at mail.gmail.com>
Content-Type: text/plain; charset="utf-8"

Yeah,? and the problem really is whether the CHIRP software will be
compatible with the radio's firmware;? and there is always the possibility
that the radio will be damaged or bricked.

On Wed, Feb 1, 2017 at 8:06 PM, John Wilkerson <jl_wilkerson at att.net> wrote:

> Looking at the manual, it does not have any of the extended features
> the
> UV-5X3 has.? I'd say, it is simply a repackaged UV-5R
>
> On 2/1/2017 13:07, dbarlow_2000--- via chirp_users wrote:
>
> I have a Rugged RH-5R that looks to be the same radio as a Baoffeng
> UV-5X3. What I would like to know are they the same? and and if so can
> I use chirp on my Rugged? as it is not listed on the support list.
>
> Thanks
>
>
>
>
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to marcus at harrismh777 at gmail.com To
> unsubscribe, send an email to chirp_users-unsubscribe@
> intrepid.danplanet.com
>



--

Kind regards,
Mark H. Harris
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20170202/c6a
f10f8/attachment-0001.html

------------------------------

Message: 10
Date: Thu, 2 Feb 2017 08:55:20 +0000 (UTC)
From: Jeff Widen <dftd3 at yahoo.com>
Subject: Re: [chirp_users] help importing file
To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
Message-ID: <909413328.90358.1486025720348 at mail.yahoo.com>
Content-Type: text/plain; charset=UTF-8

I have tried changing the column headers to match those in the stock files.
When I do it seems to recognize the file but it then says no channels found.
If I change the location column back to channel it does not recognize the
file. Why can't find any channels? Does the order of the column matter?
Here are the column headers:
Location??? Frequency??? ? ? Offset??? Duplex??? Mode??? Name??? Show
Name??? Tone Mode? ??? Tone??? ? DCS??? Tx Power??? ? ? Skip
Step
Thanks for the help,
Jeff
--------------------------------------------
On Wed, 2/1/17, Benton <benton at siletzbay.com> wrote:

 Subject: Re: [chirp_users] help importing file
 To: "Discussion of CHIRP" <chirp_users at intrepid.danplanet.com>
 Date: Wednesday, February 1, 2017, 7:28 PM

 On 2017-02-01 09:31, Tom
 Hayward wrote:

 > If you
 share the file, I can point out why it's unrecognized.
 It most
 > likely does not have the column
 header/labels Chirp is looking for, or
 >
 the data in those columns is of the wrong format.

 'Back in the day' I
 thought one of the issues with using Excel to? process csv file and Chirp
was that Excel? tended to truncate trailing? commas for? empty fields
whereas Chirp was a stickler for those being in

 place to make the columns line up
 correctly.

 Am I
 misremembering or have either of those issues been? improved?

 Benton 1feb17
 --
 KF7QLP
 benton at siletzbay.com
 _______________________________________________
 chirp_users mailing list
 chirp_users at intrepid.danplanet.com
 http://intrepid.danplanet.com/mailman/listinfo/chirp_users
 This message was sent to dftd3 at yahoo.com? at dftd3 at yahoo.com? To
unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com



------------------------------

Message: 11
Date: Thu, 2 Feb 2017 05:12:34 -0500
From: Jim Unroe <rock.unroe at gmail.com>
Subject: Re: [chirp_users] help importing file
To: Jeff Widen <dftd3 at yahoo.com>, ??? Discussion of CHIRP
??? <chirp_users at intrepid.danplanet.com>
Message-ID:
??? <CADnO8U40q4rbjzVjPARt7o+On8KrnmiH5r+PdNnf3-aZScLA5w at mail.gmail.com>
Content-Type: text/plain; charset=UTF-8

On Thu, Feb 2, 2017 at 3:55 AM, Jeff Widen via chirp_users
<chirp_users at intrepid.danplanet.com> wrote:
> I have tried changing the column headers to match those in the stock
files. When I do it seems to recognize the file but it then says no channels
found. If I change the location column back to channel it does not recognize
the file. Why can't find any channels? Does the order of the column matter?
> Here are the column headers:
> Location? ? ? ? Frequency? ? ? ? ? Offset? ? ? Duplex? Mode? ? Name
Show Name? ? ? Tone Mode? ? ? Tone? ? ? DCS? Tx Power? ? ? ? ? ? Skip
Step
> Thanks for the help,
> Jeff

Once again, if you would share (attach) your CSV file, Tom or I (and likely
many others) could tell you exactly what is wrong.

Jim


------------------------------

_______________________________________________
chirp_users mailing list
chirp_users at intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
To unsubscribe, send an email to
chirp_users-unsubscribe at intrepid.danplanet.com

End of chirp_users Digest, Vol 98, Issue 2
******************************************

_______________________________________________
chirp_users mailing list
chirp_users at intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to dbarlow_2000 at yahoo.com at dbarlow_2000 at yahoo.com
To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com



-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20170202/f57e8d43/attachment-0001.html

------------------------------

Message: 3
Date: Thu, 02 Feb 2017 16:18:03 -0600
From: Hans White <jhw3tx at me.com>
Subject: [chirp_users] Advice?
To: chirp_users at intrepid.danplanet.com
Message-ID: <559CF85D-3A4A-4EE6-BB52-9B90FBAFB899 at me.com>
Content-Type: text/plain; charset=us-ascii

Looking for some advice
I work for a small private security company that is just starting up. For some of our jobs we need radios, so I purchased some Baofeng UV- 5R to use mainly because the price. What is the best way to get the most range from these radios?
Thanks
Hans

------------------------------

Message: 4
Date: Thu, 2 Feb 2017 22:23:51 +0000
From: Douglas Haviland <doughav at hotmail.com>
Subject: Re: [chirp_users] Advice?
To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
Message-ID:
        <BY2PR02MB21688BA3618AA1C816CC1E7BA94C0 at BY2PR02MB2168.namprd02.prod.outlook.com>

Content-Type: text/plain; charset="us-ascii"

You need to have amateur radio license..

Sent from Doug Haviland's iPhone.          (spelling errors likely)

> On Feb 2, 2017, at 5:22 PM, Hans White <jhw3tx at me.com> wrote:
>
> Looking for some advice
> I work for a small private security company that is just starting up. For some of our jobs we need radios, so I purchased some Baofeng UV- 5R to use mainly because the price. What is the best way to get the most range from these radios?
> Thanks
> Hans
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to Doug at doughav at hotmail.com
> To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com


------------------------------

Message: 5
Date: Thu, 2 Feb 2017 17:27:15 -0500
From: John Wilkerson <jl_wilkerson at att.net>
Subject: Re: [chirp_users] Advice?
To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
Message-ID: <af93890b-1b2f-9392-4750-e530a6cbce5e at att.net>
Content-Type: text/plain; charset=windows-1252

Well, they need a business license and then program the radios to what
they are legally licensed to use....

IF the radios are Part 90 approved for business use.


On 2/2/2017 17:23, Douglas Haviland wrote:
> You need to have amateur radio license..
>
>



------------------------------

Message: 6
Date: Thu, 2 Feb 2017 14:31:09 -0800
From: Tom Hayward <tom at tomh.us>
Subject: Re: [chirp_users] Advice?
To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
Message-ID:
        <CAFXO5Z0=8PCnoSmjO8BNBiHBvg92FrpL8_WZ4tOo2mLhNy1XdA at mail.gmail.com>
Content-Type: text/plain; charset=UTF-8

On Thu, Feb 2, 2017 at 2:23 PM, Douglas Haviland <doughav at hotmail.com> wrote:
> You need to have amateur radio license..

This, of course, depends on what country you are in.

This mailing list is intended for discussion of the Chirp software.
General questions about radios should be left for more appropriate
venues. Here's one I found that may be helpful to you:
https://groups.yahoo.com/neo/groups/baofeng_uv5r/info

Tom KD7LXL


------------------------------

Message: 7
Date: Thu, 02 Feb 2017 21:00:21 -0500
From: "clowery at va.net" <clowery at va.net>
Subject: [chirp_users] difference between FT-1802 and FT-1802M????
To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
Message-ID: <20170202210021.23863q3uvcw2zqsk at webmail.va.net>
Content-Type: text/plain; charset=ISO-8859-1; DelSp="Yes";
        format="flowed"

can not get chirp to read my FT-1802 is there a difference between it
and a 1802M?

NM4V


------------------------------

Message: 8
Date: Thu, 2 Feb 2017 18:16:27 -0800
From: <nigel at forges.ca>
Subject: Re: [chirp_users] difference between FT-1802 and FT-1802M????
To: "'Discussion of CHIRP'" <chirp_users at intrepid.danplanet.com>
Message-ID: <000401d27dc3$8934cf80$9b9e6e80$@forges.ca>
Content-Type: text/plain;       charset="us-ascii"

Looks like it - Chirp only supports the 1802M....

Yaesu
FT-1D
FT-50R
FT-60R
FT-90R
FT-817/ND
FT-857/D
FT-897
FT-1802M
FT-2800M
FT-1900R/2900M
FT-7800R/7900R
FT-8800R
FT-8900R
FTM-350R
VX-170
VX-2R
VX-3R
VX-5R
VX-6R
VX-7R
VX-8R

-----Original Message-----
From: chirp_users-bounces at intrepid.danplanet.com
[mailto:chirp_users-bounces at intrepid.danplanet.com] On Behalf Of
clowery at va.net
Sent: Thursday, February 02, 2017 6:00 PM
To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
Subject: [chirp_users] difference between FT-1802 and FT-1802M????

can not get chirp to read my FT-1802 is there a difference between it and a
1802M?

NM4V
_______________________________________________
chirp_users mailing list
chirp_users at intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to Nigel D Forge at nigel at forges.ca To unsubscribe,
send an email to chirp_users-unsubscribe at intrepid.danplanet.com


---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus



------------------------------

Message: 9
Date: Thu, 2 Feb 2017 22:18:59 -0800
From: Tom Hayward <tom at tomh.us>
Subject: Re: [chirp_users] difference between FT-1802 and FT-1802M????
To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
Message-ID:
        <CAFXO5Z0VD1uGWxUDcQXaahcx41pNCDPp6uZZ351NPnY6YhrG-Q at mail.gmail.com>
Content-Type: text/plain; charset=UTF-8

If you have an FT-1802, give it a try with Chirp's FT-1802M driver. I
wrote it and I only had an FT-1802M to test it with. I can't tell you
if the FT-1802 is any different because I've never touched one. They
could be exactly the same.

What I would do to test it is manually enter a few memory channels in
the FT-1802. Then download into Chirp and make sure those channels are
where they're supposed to be (channel 1 is channel 1, etc.) and that
all the frequencies and tones are correct. If it all looks good then
there's probably no change to the memory layout between FT-1802 and
FT-1802M.

Tom KD7LXL

On Thu, Feb 2, 2017 at 6:00 PM, clowery at va.net <clowery at va.net> wrote:
> can not get chirp to read my FT-1802 is there a difference between it
> and a 1802M?
>
> NM4V
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to Tom KD7LXL at esarfl at gmail.com
> To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com


------------------------------

Message: 10
Date: Fri, 03 Feb 2017 05:06:21 -0500
From: clowery <clowery at va.net>
Subject: Re: [chirp_users] difference between FT-1802 and FT-1802M????
To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
Message-ID: <6n384ro0wxy9insjok9xd2by.1486116381022 at email.android.com>
Content-Type: text/plain; charset="utf-8"



When I try to read the radio it does not identify the model number correctly. ?It sees that the radio is a Yaesu but the wrong one.?


Sent from my Verizon Wireless 4G LTE smartphone

-------- Original message --------
From: Tom Hayward <tom at tomh.us>
Date: 02/03/2017  1:18 AM  (GMT-05:00)
To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
Subject: Re: [chirp_users] difference between FT-1802 and FT-1802M????

If you have an FT-1802, give it a try with Chirp's FT-1802M driver. I
wrote it and I only had an FT-1802M to test it with. I can't tell you
if the FT-1802 is any different because I've never touched one. They
could be exactly the same.

What I would do to test it is manually enter a few memory channels in
the FT-1802. Then download into Chirp and make sure those channels are
where they're supposed to be (channel 1 is channel 1, etc.) and that
all the frequencies and tones are correct. If it all looks good then
there's probably no change to the memory layout between FT-1802 and
FT-1802M.

Tom KD7LXL

On Thu, Feb 2, 2017 at 6:00 PM, clowery at va.net <clowery at va.net> wrote:
> can not get chirp to read my FT-1802 is there a difference between it
> and a 1802M?
>
> NM4V
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to Tom KD7LXL at esarfl at gmail.com
> To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
_______________________________________________
chirp_users mailing list
chirp_users at intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to Charles Lowery at clowery at va.net
To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20170203/ecced9c8/attachment-0001.html

------------------------------

Message: 11
Date: Fri, 3 Feb 2017 09:09:34 -0800
From: Tom Hayward <tom at tomh.us>
Subject: Re: [chirp_users] difference between FT-1802 and FT-1802M????
To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
Message-ID:
        <CAFXO5Z3oC5=mkt+jJ6sNWFy99m2=zm5TMY0ZJvdbr7vw2JAq8Q at mail.gmail.com>
Content-Type: text/plain; charset=UTF-8

On Fri, Feb 3, 2017 at 2:06 AM, clowery <clowery at va.net> wrote:
> When I try to read the radio it does not identify the model number
> correctly.  It sees that the radio is a Yaesu but the wrong one.

That description is not consistent with the error messages I see used
in the FT-1802M code. If you send me your debug.log I might be able to
help more.

http://chirp.danplanet.com/projects/chirp/wiki/How_To_Report_Issues#Getting-your-debug-log

Tom KD7LXL


------------------------------

_______________________________________________
chirp_users mailing list
chirp_users at intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com

End of chirp_users Digest, Vol 98, Issue 3
******************************************
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20170204/04ecb731/attachment.html 


More information about the chirp_users mailing list