[chirp_users] Attention BF-T1 users: dev driver available to test.

[randy carr]

Thanks.

On Dec 15, 2017 2:30 PM, "Jim Unroe" <rock.unroe at gmail.com> wrote:

> On Fri, Dec 15, 2017 at 3:59 PM, randy carr <rankath99 at gmail.com> wrote:
> > I have a boafeng BF9-f9v2+ which I am trying to program using chirp and
> the
> > baofeng cable and the BF-8HP file.  I can add channels to chirp OK and
> the
> > program recognizes and clones from the radio to the program list.
> However,
> > I cannot upload to the radio from the program list.  The pick list under
> > radio does not give me the option to upload to radio:  i.e. the "upload
> to
> > radio" pick is "greyed out" and will not function. What am I doing wrong?
> >
>
> You should start another topic since this one is about the BF-T1. But
> to answer your question, your problem is that you created a file
> without downloading from the radio first. You must download from the
> radio to create a tab that is compatible with the radio. Save the
> first successful download, unedited, to a file to be kept in a safe
> place as a backup. After that you can save the tab again with its
> "working" name to be edited with your channels (you can import the
> list you made) and upload it to your radio.
>
> Jim KC9HI
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to james carr at rankath99 at gmail.com
> To unsubscribe, send an email to chirp_users-unsubscribe@
> intrepid.danplanet.com
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20171215/6a887e81/attachment.html