[chirp_users] Baorfeng transmit block while on reverse frequency

[Eric H]

I suspected that. Thanks for the help though. I appreciate it. 


Sent from my iPhone

> On Aug 15, 2017, at 5:31 PM, Jim Unroe <rock.unroe at gmail.com> wrote:
> 
>> On Tue, Aug 15, 2017 at 5:20 PM, Eric H <camopainter at hotmail.com> wrote:
>> The firmware message 1 is HNR5RV01
>> Message 2 is 1FB297
>> If I go to a ham repeater and hit the star to reverse frequency it will allow me to change to any channel and transmit and the R stays at the top of the screen.
>> 
> 
> Unfortunately the HN5RV01... firmware has been the worst firmware
> release I have seen from Baofeng since the UV-5R was originally
> brought to market in late 2011/early 2012. I think I have a radio
> around here somewhere with that firmware version. I may give it a try.
> In any case, that is the way the hardware works and there is nothing
> CHIRP can do to overcome it.
> 
> Jim
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to ERIC at camopainter at hotmail.com
> To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com