[chirp_users] FT2900

[Jardy]

Should be 3.2.0.0. Fat fingers on an Apple iPhone. 

Jardy Dawson WA7JRD
Message sent through sub space hailing frequencies using the Universal Translator. 


> On Apr 26, 2017, at 22:27, Jardy via chirp_users <chirp_users at intrepid.danplanet.com> wrote:
> 
> Roll your cable driver back to 3.2.0.9.
> 
> Jardy Dawson WA7JRD
> Message sent through sub space hailing frequencies using the Universal Translator. 
> 
> 
>> On Apr 26, 2017, at 21:55, Eric Chopin <echopin27 at gmail.com> wrote:
>> 
>> Greetings again CHIRP'rs I now have a Yaesu FT2900 that I would like to program with CHIRP. 
>> I have a Prolific cable and found the 'pin out' on the mike socket ( #4 GRD - #6 CLONE) 
>> 
>> I go through the sequence to get the radio into 'CLONE' mode and then to 'TX' but the response I get from CHIRP is "The radio is not responding" and "ERROR" on the radio LCD readout.
>> 
>> Any offers?
>> 
>> 73's
>> Eric
>> _______________________________________________
>> chirp_users mailing list
>> chirp_users at intrepid.danplanet.com
>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>> This message was sent to Jardy at jardy72 at yahoo.com
>> To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to Jardy at jardy72 at yahoo.com
> To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20170426/a96f075c/attachment.html