[chirp_users] FT2900

[Jardy]

Roll your cable driver back to 3.2.0.9.

Jardy Dawson WA7JRD
Message sent through sub space hailing frequencies using the Universal Translator. 


> On Apr 26, 2017, at 21:55, Eric Chopin <echopin27 at gmail.com> wrote:
> 
> Greetings again CHIRP'rs I now have a Yaesu FT2900 that I would like to program with CHIRP. 
> I have a Prolific cable and found the 'pin out' on the mike socket ( #4 GRD - #6 CLONE) 
> 
> I go through the sequence to get the radio into 'CLONE' mode and then to 'TX' but the response I get from CHIRP is "The radio is not responding" and "ERROR" on the radio LCD readout.
> 
> Any offers?
> 
> 73's
> Eric
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to Jardy at jardy72 at yahoo.com
> To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20170426/5a9c02af/attachment.html