[chirp_users] trying to program Kenwood F6a

Jeff
Fri Apr 7 10:09:32 PDT 2017


Assuming menu item 9 is set to PC on the F6A and the Baofeng model you have uses the standard Kenwood wiring scheme, it should work.

There wouldn't be any difference between the F6 and F6A that would affect this operation.

On April 7, 2017 9:46:10 AM MDT, Jake McGill via chirp_users <chirp_users at intrepid.danplanet.com> wrote:
>Bough a cable for my Baofeng and Kenwood F6a.
>Can download and uplaod on Baofeng but Kenwood has problem.
>First- I am using the F6 as the model number because there is no F6A
>listed.
>When I try to download I get two different types of failure-1-
>sometimes get the transmit LED on the radio blinking once or twice and
>then but I get a blank grey main chirp pageorIf I use Detect for model
>name, I get a delay and then a "No response from radio" error message.
>Is it possible that this cable only works on the Baofeng?  Jake    
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20170407/e68c03a9/attachment.html 


More information about the chirp_users mailing list