[chirp_users] Baofeng GT-3

[Neil B]

hi,

loaded up py file ok.

read my gt-3tpiii with hv, using  the f8hp.
i set 3 locations as low/med/high.
read it back to radio and radio accepted it and works as l/m/h
looks good there.

i also, read from radio ok still on uv-5r
strange tho,
what was low,med and high, showed in chirp high low high but on writing back 
to radio, radio is still l,m,h

just wrote to radio again, and then  it went  h/m/h again in uv5r mode.

reading radio as 8hp again, its is h/m/h
changed levels back to l/m/h

i used mem location 1,2,3 as l,m,h

on reload of chirp to test img, it failed, but i then reloaded the py 
module.

saved several img to reload,edit and mess with and all seemed ok. no loss or 
changed data occur.

i dont have my uv5r here at mo to check that is still ok.

seperatly, can we have use of windows alt keys, ie, on a save yes no cancel 
dialog box,  using keys y/n/esc would do the action as in most other windows 
apps?
----- Original Message ----- 
From: "Jim Unroe" <rock.unroe at gmail.com>
To: "Discussion of CHIRP" <chirp_users at intrepid.danplanet.com>
Sent: Saturday, April 01, 2017 7:19 PM
Subject: Re: [chirp_users] Baofeng GT-3


> On Sat, Apr 1, 2017 at 1:31 PM,  <ve3zxs at gmail.com> wrote:
>> Thank you worked like a charm!!
>>
>> Dan
>> 73
>>
>
>
> The bad news is that it only allow choices to program 2 power levels
> (HIGH and LOW) which are actually HIGH and MID on your radio. No
> choice for low. I would appreciate it if you would try this test
> driver and provide feedback.
>
> http://chirp.danplanet.com/issues/4445#note-12
>
> Jim KC9HI
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to m1cfk at ne.b at hotmail.co.uk
> To unsubscribe, send an email to 
> chirp_users-unsubscribe at intrepid.danplanet.com
>