[chirp_users] soft ware

[Cecil Crowder Sr]

Thanks, KI4JRL here

________________________________
From: chirp_users-bounces at intrepid.danplanet.com <chirp_users-bounces at intrepid.danplanet.com> on behalf of Jim Unroe <rock.unroe at gmail.com>
Sent: Monday, September 26, 2016 4:04 AM
To: Discussion of CHIRP
Subject: Re: [chirp_users] soft ware

On Mon, Sep 26, 2016 at 1:00 AM, Cecil Crowder Sr
<rodbuster_one at hotmail.com> wrote:
> soft ware for Bafeng BV-F9V2+   what soft ware do I need  ????
>
>

Hi Cecil,

According to the Supported Radio Models list on the CHIRP home/wiki
page, you can use CHIRP by selecting Baofeng as the Vendor and BF-F8HP
as the Model.

BF-F8HP
Also includes the BF-A58
Also includes the BF-F9V2+  <-- this is your radio
Also includes the GT-3TP
Also includes the UV-5RTP
Also includes the UV-5R7W

You can also use the Baofeng software for the BF-F8HP.

Jim KC9HI
_______________________________________________
chirp_users mailing list
chirp_users at intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
chirp_users -- Discussion of CHIRP - intrepid.danplanet.com<http://intrepid.danplanet.com/mailman/listinfo/chirp_users>
intrepid.danplanet.com
This list is for discussion of CHIRP use, issues, and beta releases. At any point, the latest daily build will be available here: http://trac.chirp.danplanet.com ...



This message was sent to Cecil Crowder Sr at rodbuster_one at hotmail.com
To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20160926/da75935b/attachment.html