[chirp_users] CHIRP and the Kenwood TH-F6A; syncing with Icom

[Amnon Zohar]

would have beeen nice if you included rich's issue....

2016-05-27 1:43 GMT+03:00 Jim Unroe <rock.unroe at gmail.com>:

> Rich,
>
> I have a Kenwood TH-F6a. So just for the fun of it, I attached CHIRP
> to it and read it in live mode. I copied and pasted on of the channels
> from the TH-F6 tab to a tab from one of my Baofeng radios (a loaded
> .img file). No problem.
>
> Then I followed the instructions that you pasted into your post and
> exported the TH-F6a to a .csv file. I imported this into the image of
> my Baofeng radio also without any problem.
>
> And just for good measure, I exported the TH-F6a to a .chirp file and
> imported it into my Baofeng radio image. No problem.
>
> Part of the difference, I suppose, is that I am not trying to load 2
> instances of CHIRP. I am doing it with multiple tabs in a single
> instance of CHIRP.
>
> Jim KC9HI
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to amnon at amnon.zohar at gmail.com
> To unsubscribe, send an email to
> chirp_users-unsubscribe at intrepid.danplanet.com
>



-- 
Amnon
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20160527/42e23142/attachment.html