[chirp_users] Luiton LT-588UV

[Ron Maruska]

Go to Miklor.com for the drivers you need. 

    On Monday, May 23, 2016 9:19 AM, Jim Unroe <rock.unroe at gmail.com> wrote:
 

 On Mon, May 23, 2016 at 7:52 AM, Jack Schlachter <km4tdj at gmail.com> wrote:
> Hi - Thanks for letting me join the group. The reason I joined is because I
> bought this radio for a good price after reading some good reviews on
> Amazon. There's not much else on the internet about this radio. I've
> downloaded all the softwares available with proper drivers. I've followed
> the help files on your site plus the ones on Luitons' site. Always I get the
> same result " Can't connect to the port or radio". I point the software at
> the right port. I show the ver. 3.2.0.0 dated 7/3/2007 and "this device is
> working properly". I can't even begin to enter frequencies and codes
> manually because I can't decipher the Chiglish. Could you please help me and
> try to get this radio working? Thank you,
> Jack

Jack,

Have you gotten it to work with the OEM software? The reason I ask is
because the error that you say you are getting sounds like a
cable/driver issue. No programming software will work unless there is
a working connection between the radio and computer.

The second part is that unless the Luiton LT-588UV is an exact clone
of a supported radio in this genre of radios, is not supported by
CHIRP.

Jim KC9HI
_______________________________________________
chirp_users mailing list
chirp_users at intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to Ron at num1boppa at yahoo.com
To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com


   
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20160523/fb4e74a0/attachment.html