[chirp_users] Problem with reprogramming Wouxun KG-UVD1P

[Jardy Dawson]

Did you check device manager to see what comm port you were using?  Use the same USB port each time. Check the cable driver. If you are using a Prolific cable, roll your driver back to 3.2.0.0. 

Jardy Dawson
WA7JRD Ham Radio

Message relayed through The Senior Boston Relay Race baton pass.

On May 20, 2016, at 04:36, Shon Edwards <sre.1966 at gmail.com> wrote:

Hello all,

Maybe this has been talked about recently, but can't find a post.  I programmed my Wouxun KG-UVD1P (1.25M/2M ver.) a couple of years ago and have tried to use a newer version of CHIRP to update it.  When that didn't work, I used a 3.1 version, got the same error (com port error), but not sure why it wouldn't take.

Could anyone please help?  Let me know of any other info you need.

Thx,

Shon, K6QT



Shon R. Edwards, MA, AG (Czech Republic)
Amateur call:  K6QT
1039 N 2575 W
Layton, UT, 84041-7709
USA
Home phone:  (801) 444-3445
E-mail:  sre.1966 at gmail.com

or

Shon Edwards
715 Strawberry Creek Private Rd.
Bedford, WY 83112
Cell:  (307) 248-2104
_______________________________________________
chirp_users mailing list
chirp_users at intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to Jardy at jardy72 at yahoo.com
To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20160520/46863ef6/attachment.html