[chirp_users] Boafeng UV-5RV2+ unable to download

[Randy Elliott]

Hi all I have agree with Dave I have been fooled many times thinking the plug was seated when it wasn't. I built an interface box for doing my programming of these radios and had to remove the the plug covers so the plug could be seated properly into the radio, so as Dave says make sure it is pushed in all the way, it takes a lot pressure to seat it

Randy 
VE3JPU at me.com


> On May 14, 2016, at 10:50 PM, Dave Felt <feltdd at verizon.net> wrote:
> 
> Maybe have to plug it in REALLY HARD... as they say...
> 
>> On 5/14/2016 4:19 PM, Ron Maruska via chirp_users wrote:
>> I have a Baofeng uv-5r and the radio is garbage and the Baofeng software is scrap. I sent an email to Baofeng about the software and they would not support it. I told them to get F#*&ked and said I would post there reply on Ebay.
>> 
>> On Saturday, May 14, 2016 5:01 PM, Eugene <enine at ninefamily.com> wrote:
>> 
>> I ordered a programming cable for my Baofeng UV-5RV2+ and the first time 
>> I tried to download from the radio I got 25 channels.  Trying again only 
>> channel 5 and 6 would show up.  I upgraded the the latest version of 
>> CHIRP and now when I try the radio just reboots and CHIRP says an error 
>> has occured, radio does not respond.  Did I get a bad cable?
>> 
>> Thanks
> 
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to Skid at ve3jpu at me.com
> To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20160515/8bc2b7a4/attachment.html