[chirp_users] Mac driver issues SCU-18

[Tom Hayward]

On Tue, May 3, 2016 at 3:08 PM, Aubrey Turner <aubrey.c.turner at gmail.com> wrote:
> If you could somehow get the FTDI driver to recognize the RATOC-specific
> IDs, you might have a chance.  But as far as I can tell, no one as done
> this.

The other option is reprogramming the cable to report the generic FTDI
VID/PID instead of the RATOC-specific VID/PID. That method is
described here:
http://chirp.danplanet.com/projects/chirp/wiki/CableGuide_FTDI_OEM_Cables#Change-your-cables-ID-to-FTDI-default

Now the standard FTDI driver will recognize it.

You can reprogram it back when you're done. (Don't forget to write
down the original values!)

Tom KD7LXL