[chirp_users] Newbe problem

[Todd Bloomingdale]

Danny,

All changes can be done right in the CHIRP software. There is no need to
get all confused with exporting to .csv then make changes and then upload
back into chirp. It can all be done right in the software.

Todd Bloomingdale​-KC9LOX​

Tomah, WI

On Tue, Mar 1, 2016 at 10:13 AM, Danny Richardson <k6mhe at k6mhe.com> wrote:

> I'm new to using Chirp and have hit a stumbling block trying to program
> my UV5R. I am able to download a *.img file from my radio, ex[port to an
> Excel *.cvs file, make changes to the Excel file and then export as a
> *.chirp file, load the *.chirp file into program but am unable to up
> load the file to my radio.
>
> The original file downloaded from the radio is a *.img and I find no
> options in the Chrip program to export as a *.img file.
>
> Holding down the 3 key when turning on the radio displays BFB297.
>
> Any help would be appreciated.
>
> 73,
> Danny, K6MHE
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to tbloomingdale at gmail.com at
> tbloomingdale at gmail.com
> To unsubscribe, send an email to
> chirp_users-unsubscribe at intrepid.danplanet.com
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20160301/653b2019/attachment.html