[chirp_users] Settings to match Motorola PL tones

[Curley Frazier]

IMO no on the TSQL. That is different than CTCSS.  INSTEAD YOU WANT ONLY
T-CTCS
On Jun 8, 2016 7:27 AM, "Jeffrey" <fongemie at gmail.com> wrote:

> Hey everyone,
>
> I'm pretty new to radios in general, and more so programming them, but
> I'll do my best to get the terminology right.
>
> I'm trying to use CHIRP to program a UV-5R so that it can communicate with
> a Motorola radio on a certain frequency.  The Motorola is set to use
> 151.9400 with a PL tone of 67.0 for both send and receive.
>
> PL is the same as CTCSS correct?
>
> On the UV-5R, I've got Tone Mode set as TSQL and ToneSql set to 67.0 - and
> it does not work? The two radios are not communicating.  Am I missing
> something? Something special about Motorola PL tones? Should be a standard
> right?
>
> Thanks for any advice.
>
> Jeff
>
> --
> ______________
>
> Jeffrey Fongemie
>
> <http://instagram.com/jfongemie>
>
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to Rick Frazier at ricknbrook at gmail.com
> To unsubscribe, send an email to
> chirp_users-unsubscribe at intrepid.danplanet.com
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20160608/4b6e87c4/attachment.html