[chirp_users] Kenwood TK-762H

[Tim Billingsley]

On Mon, May 16, 2016 at 1:55 PM, Pavel Milanes (CO7WT) <pavelmc at gmail.com>
wrote:

> Hi Tim and everybody,
>
> I had a lot of work recently and was away for a while... and now I'm
> paying attention to the new variants of the mobile
> QYT/BTECH/Juentai/Sainsonic etc mobiles that are growing like grass in the
> spring. (I'm in change of the communication procedures for that also...)
>
> I will revisit the Kenwood TK-760 driver as soon as I can get free time,
> sorry for the delay on solving this.
>
> 73.
>


I apologize for the long delay.    With health issues and an amount of
tracel out of the way I have just tested 4 radios. 2 TK-762 and 2 TK-762H
none worked. The CHIRP options of TK-760G & TK-762G appears to read from
the radio then throws the error


ERROR: Traceback (most recent call last):
  File "/usr/lib/python2.7/dist-packages/chirp/ui/clone.py", line 249, in
run
    self.__radio.sync_in()
  File "/usr/lib/python2.7/dist-packages/chirp/drivers/tk760.py", line 410,
in sync_in
    self._mmap = do_download(self)
  File "/usr/lib/python2.7/dist-packages/chirp/drivers/tk760.py", line 254,
in do_download
    open_radio(radio)
  File "/usr/lib/python2.7/dist-packages/chirp/drivers/tk760.py", line 226,
in open_radio
    raise errors.RadioError(msg)
RadioError: Radio refuse to enter into program mode after a few tries

ERROR: ----------------
ERROR: Clone failed: Radio refuse to enter into program mode after a few
tries
ERROR: --- Exception Dialog: Radio refuse to enter into program mode after
a few tries ---
ERROR: None

ERROR: ----------------------------








> El 15/05/16 a las 03:27, Tim Billingsley escribió:
>
> I have a couple of old Kenwood TK-762H transceivers. I see the issue on
> http://chirp.danplanet.com/issues/3139 but I seem to be having troubles.
> When I attempt to read from the radio using TK-762G it appears to read from
> the radio then dumps the error dialog *"An error has occurred: The radio
> doesn't accept program mode"*
>
>
> ERROR: -- Exception: --
> ERROR: Traceback (most recent call last):
>   File "/usr/lib/python2.7/dist-packages/chirp/ui/clone.py", line 238, in
> run
>     self.__radio.sync_in()
>   File "/usr/lib/python2.7/dist-packages/chirp/drivers/tk760g.py", line
> 884, in sync_in
>     self._mmap = do_download(self)
>   File "/usr/lib/python2.7/dist-packages/chirp/drivers/tk760g.py", line
> 517, in do_download
>     _open_radio(radio, status)
>   File "/usr/lib/python2.7/dist-packages/chirp/drivers/tk760g.py", line
> 478, in _open_radio
>     raise errors.RadioError("The radio doesn't accept program mode")
> RadioError: The radio doesn't accept program mode
>
> ERROR: ----------------
> ERROR: Clone failed: The radio doesn't accept program mode
> ERROR: --- Exception Dialog: The radio doesn't accept program mode ---
> ERROR: None
>
> ERROR: ----------------------------
>
>
>
>
> If I attempt using TK-760 chirp attmpts to read and almost immediately
> dumps the error dialog saying *"An error has occurred Radio refuse to
> enter into program mode after a few tries"*
> ERROR: ----------------------------
> ERROR: -- Exception: --
> ERROR: Traceback (most recent call last):
>   File "/usr/lib/python2.7/dist-packages/chirp/ui/clone.py", line 238, in
> run
>     self.__radio.sync_in()
>   File "/usr/lib/python2.7/dist-packages/chirp/drivers/tk760.py", line
> 411, in sync_in
>     self._mmap = do_download(self)
>   File "/usr/lib/python2.7/dist-packages/chirp/drivers/tk760.py", line
> 255, in do_download
>     open_radio(radio)
>   File "/usr/lib/python2.7/dist-packages/chirp/drivers/tk760.py", line
> 227, in open_radio
>     raise errors.RadioError(msg)
> RadioError: Radio refuse to enter into program mode after a few tries
>
> ERROR: ----------------
> ERROR: Clone failed: Radio refuse to enter into program mode after a few
> tries
> ERROR: --- Exception Dialog: Radio refuse to enter into program mode after
> a few tries ---
> ERROR: None
>
> ERROR: ----------------------------
>
>
>
>
>
> FWIW I am running
> CPU~Dual core AMD E2-1800 APU with Radeon HD Graphics (-MCP-) speed~1700
> MHz (max)
> Kernel~4.2.0-34-generic i686
> Mem~2035.9/3635.1MB
> HDD~750.2GB(35.9% used)
> Ubuntu 15.10
> CHIRP daily-20160513
> GTK 2.24.28
> PyGTK 2.24.0
> Python 2.7.10
>
>
> I am also having issues with a QTY KT8900
> I have tried to follow all this has been discussed on
> <http://chirp.danplanet.com/issues/2673>
> http://chirp.danplanet.com/issues/2673 but to no avail.
>
>
>  any assistance is appreciated
>
>
> _______________________________________________
> chirp_users mailing listchirp_users at intrepid.danplanet.comhttp://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to M.Sc. Pavel Milanes Costa at pavelmc at gmail.com
> To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
>
>
>
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to Tim at kd5ckp at gmail.com
> To unsubscribe, send an email to
> chirp_users-unsubscribe at intrepid.danplanet.com
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20160722/baedc7ec/attachment.html